PS30 rectangular pool POOLSANA SQ 7.00 x 3.50 x 1.50 m foil…
7,26 €
Pool depth 150 cm, water depth approx. 142-144 cm, capacity approx. 35 m³, number of insulating blocks: 110 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the reinforcement may need to be adjusted.
Description
POOL SANA rectangular pool consisting of PS30 insulating shell elements + a precisely fitting, blue 1.0 mm PVC pool liner made in Germany with wedge bead + aluminum hanging profiles. As a PROFI High Level set, including a POOL SANA 75 W UV-C disinfection unit (significantly reduces water treatment requirements), rot-proof protective fleece + spray adhesive, wide-mouth Slim built-in skimmer for an extra high water level + bottom drain + 2 inlet nozzles with wall penetrations, and a POOL SANA PRO PRIME 500 sand filter system…
Additional information
| Weight | 183,48 kg |
|---|
Related products
Cuttable stainless steel pool ladder COMFORT 5-step for mounting…
Very stable ASTRALPOOL swimming pool ladder with ladder stiles made of highly polished V2A stainless steel with a stile diameter of 43 mm. The pool ladder has five non-slip plastic steps on each side and a central ladder platform, and is suitable for above-ground pools up to 1.35 m deep. If the swimming pool is partially sunk into the ground, the ladder stiles located on the outside of the pool can easily be shortened accordingly with a hacksaw, possibly removing some steps.
PS30 rectangular pool PS 8.00 x 4.00 x 1.50 m 4D film 0.9 …
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 45 m³, number of insulating blocks: 125 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the reinforcement may need to be adjusted.
PS3080 rectangular pool POOLSANA HQ 7.00 x 3.50 x 1.50 m…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 34.5 m³, number of insulating blocks: 110 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the type of reinforcement may need to be adjusted...
Rectangular pool 6.00 x 3.00 x 1.50 m PROFI set high level …
Pool depth 150 cm, water depth approx. 142-144 cm, capacity approx. 25.5 m³, number of insulating blocks: 95 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the type of reinforcement may need to be adjusted.
Single pool, steel wall round pool POOLSANA HQ 3.50 x 1.50 m…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 13.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...
Steel wall round pool POOLSANA HQ 4.50 x 1.35 m PLUS set…
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 20 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or...
Steel-walled figure-eight pool PS HQ 5.25 x 3.20 x 1.20 m liner…
Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 17.5 m³. General information on steel-walled figure-eight pools: All figure-eight pools (1.20 m and 1.35 m) can be installed either freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. A base slab is required for all figure-eight pools, into which the included steel support structure, consisting of two side supports and one...
Swimming pool skimmer MTH SK 2, glued version…
No installation costs – and the pool liner remains intact. This surface skimmer is well-suited for all above-ground pools, including round and figure-eight pools, as no hole needs to be cut into the pool wall or liner. The overhanging skimmer is simply hung over the pool wall and secured with suction cups. The skimmer is suitable for steel-walled pools with a handrail width of up to 40 mm. The MTH SK 2 features a pre-filter basket. This filters out coarse debris...