Pool roller system PROFI AluEdelstahl Deluxe for Au…
367,84 €
The perfect solution for above-ground pools: Thanks to extendable side supports, the winding shaft can be adjusted to any height, allowing the winding mechanism to be used with partially in-ground or freestanding pools. The aluminum winding shaft consists of two main shafts and three secondary shafts. The secondary shafts are slightly smaller in diameter than the main shaft and are inserted laterally into it and locked in the desired position. This makes the winding mechanism suitable for…
Related products
4D pool liner for rectangular pools, 0.9 mm, blue
Pool Liner Made in Germany: This pool liner is manufactured in Germany in compliance with the highest quality standards. The work is carried out by skilled professionals, some of whom have decades of experience. The innovative and completely new 4D pool liner gives your pool an unparalleled interior lining. 4D expands the surface properties of a conventional pool liner by adding two more dimensions at once...
Bypass valve for pool heat pumps
This bypass valve is ideal for connecting smaller heat pumps to freestanding swimming pools with hose piping. The three shut-off valves allow precise regulation of the flow rate through the heat pump, ensuring optimal efficiency depending on the weather. It accepts 32 mm or 38 mm plastic hose connections.
MTH Air Protect Bicolor pool cover for round pools, color…
For optimal pool protection in winter, choose the inflatable AIR PROTECT cover from MTH, designed for round pools. Both the top and bottom surfaces are made of woven-reinforced PVC, each weighing 580 g/m². When inflated, this double-layered cover forms a uniform dome over the pool, providing excellent protection. Rainwater, dirt, and even snow are prevented from entering your pool. A valve inlet adapter (20 mm diameter) is included.
Oval pool POOLSANA HQ 4.90 x 3.00 x 1.50 m with aluminum handrail…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 17.5 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection...
Single pool, steel wall round pool POOLSANA HQ 6.00 x 1.50 m
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 39.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...
Single pool, steel wall round pool PS SQ 6.00 x 1.50 m with A…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 39.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...
Single steel-walled round pool PS HQ 5.00 x 1.35 m Fol…
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 24.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...
Steel wall round pool POOLSANA HQ with aluminum handrail 3.50 x 1,…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 13.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...