Set of 1 x COMPACT LED pool spotlight, white, 40 W, including safety device…
445,28 €
Create stunning accents and make your pool a real eye-catcher, even in the evening, with beautiful underwater lighting. Our flat LED pool lights bathe the water’s surface in a pleasant light, creating a relaxing atmosphere by the pool. Equipped with a small recessed niche, this light is particularly well-suited for installation in curved steel walls, so you don’t have to forgo beautiful lighting even with a round pool. Another…
SKU:
223389
Category: New products
Description
Recessed pool spotlight in cool white. Installation options: straight pool wall and curved pool wall. Includes mini recessed niche, foil flange, and cable protection conduit. Luminous flux: 4,400 lm. Power: 12 V, 40 W. Made in Europe. Includes low-voltage safety transformer (230/12 V) and cable junction box.
Additional information
| Weight | 2,036 kg |
|---|
Related products
100 VA safety transformer for LED pool lighting
142,78 €
Made in Germany. Short-circuit proof safety transformer suitable for connecting underwater spotlights. The output voltage is reduced to 12 V. On the input side, the transformer comes pre-wired with a 2 m long cable. The output side features a PG screw terminal on the housing and connection terminals inside the transformer itself. It can connect two LED lamps, each with a maximum power of 50 W. Technical data: Input/Output 230 V / 12 V, 50/60 Hz. Protection class IP 65.
Oval pool POOLSANA HQ 8.00 x 4.00 x 1.50 m with aluminum handrail…
4,84 €
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 40 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing steel, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection of the...
Pool skimmer with reinforced plastic bottom, professional quality
7,26 €
Round pool PS HQ 4.50 x 1.35 m, aluminum handrail, 0.8mm liner…
2,42 €
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 20 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or...
Sand filter system Pro Prime 400 SPECK ProPump 7
578,38 €
Heavy-duty and pressure-resistant filter tank Made in Germany. The sand filter tank with a diameter of 400 mm is made of polypropylene and is particularly impressive due to its high-quality workmanship and high pressure resistance of up to 1.5 bar. In combination with the self-priming, plug-and-play pool pump, which has a circulation capacity of approximately 7 m³/h at 6 mWs, 450 watts, 230 V, the system is very well suited for swimming pools up to approximately 35 m³. Filling capacity...
Steel wall oval pool POOLSANA HQ 5.25 x 3.20 x 1.50 m PLUS set
2,42 €
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 20.5 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After assembly, the ends of the oval pool are backfilled with lean concrete. For disinfection...
Steel wall round pool POOLSANA HQ with aluminum handrail 3.00 x 1,…
2,42 €
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 10 m³. General information on steel-walled round pools: All round pools 1.20 m and 1.35 m can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the swimming pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or...
Steel-walled figure-eight pool PS HQ 5.25 x 3.20 x 1.35 m liner…
2,42 €
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 20 m³. General information on steel-walled figure-eight pools: All figure-eight pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. A base slab is required for all figure-eight pools, into which the included steel support structure, consisting of two side supports and one base plate, is installed.
