PS3080 rectangular pool POOLSANA HQ 7.00 x 3.50 x 1.50 m... - Image 1
Click to enlarge
Home » Shop » PS3080 rectangular pool POOLSANA HQ 7.00 x 3.50 x 1.50 m…

PS3080 rectangular pool POOLSANA HQ 7.00 x 3.50 x 1.50 m…

7,26 €

Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 34.5 m³, number of insulating blocks: 110 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the type of reinforcement may need to be adjusted…

SKU: 107321 Category:
Description

POOL SANA rectangular pool consisting of PS3080 insulating shell elements + a precisely fitting, blue 0.8 mm PVC pool liner (Made in Germany) with wedge bead + aluminum hanging profiles. As a PROFI set, it includes a POOL SANA 75 W UV-C disinfection unit (significantly reduces water maintenance requirements), rot-proof protective fleece + spray adhesive, wide-mouth built-in skimmer and two inlet nozzles with wall penetrations, and a POOL SANA PRO PRIME 500 SPECK PP 11 sand filter system (Made in Germany) including soil-resistant filter sand.

Related products

Aluminum wall oval pool PS SQ 8.00 x 4.00 x 1.50 m with aluminum handrail…

7,26 €
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 40 m³. General information on aluminum-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection of the pool...
Add to cart

Pool Full-Inverter Heat Pump POOLSANA InverPREMIUM 11

2 243,34 €
High-end pool heating: From exceptional efficiency to unparalleled comfort – the POOLSANA InverPREMIUM series of pool heat pumps sets new standards in every aspect of pool heating. With an impressive COP of up to 18, they underscore their unique energy efficiency thanks to their full inverter technology. The comprehensive full-color display takes user-friendliness to a new level. And with the integrated LED strip, they always provide...
Add to cart

Pool liner for rectangular pools, sand

832,48 €
Pool Liner Made in Germany: This pool liner is manufactured in Germany in compliance with the highest quality standards. From the production of the raw material into liner sheets to the finishing and welding together to create a complete pool lining, this pool liner guarantees you exclusively quality Made in Germany. The work is carried out by skilled professionals, some of whom have decades of experience. As a testament to our own conviction...
Add to cart

Pool wall brush 45 cm aluminum reinforced PREMIUM

7,26 €
45 cm wide brush for cleaning the pool floor and pool wall, with adapter for connection to a telescopic pole.
Add to cart

PS30 rectangular pool POOLSANA HQ 5.00 x 3.00 x 1.50 m foil…

4,84 €
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 21 m³, number of insulating formwork blocks: 85 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the reinforcement may need to be adjusted.
Add to cart

Round pool Alu PS SQ 3.50 x 1.25 m Alu handrail 0.9 mm …

2,42 €
Pool depth 125 cm, water depth approx. 110-115 cm, capacity approx. 11 m³. General information on aluminum-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required regardless of the pool size...
Add to cart

Round pool, aluminum PS HQ, 5.00 x 1.25 m, aluminum handrail 0.8 mm …

2,42 €
Pool depth 125 cm, water depth approx. 110-115 cm, capacity approx. 22.5 m³. General information on aluminum-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, a concrete base slab is required – regardless of the pool size…
Add to cart

Steel wall round pool PS HQ 5.00 x 1.35 m, liner 0.8 mm sand …

2,42 €
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 24.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...
Add to cart