Steel-walled round pool with iron mica coating, aluminum handrail, and foil…
2,42 €
Pool depth 125 cm, water depth approx. 110-115 cm, capacity approx. 22.5 m³. General information on steel-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, a concrete base slab is required, regardless of the pool size…
Description
Steel-walled round pool POOL SANA – Made in Germany – consisting of a 0.8 mm thick, hot-dip galvanized steel wall in gray iron mica + a precisely fitting, sand-colored 0.8 mm PVC pool liner with a hanging bead + a combination special handrail made of high-quality and stable aluminum, as well as plastic base rails. The COMFORT set includes equipment for freestanding or partially in-ground installation, a 300 g/m² underlay fleece, a built-in skimmer and inlet nozzle, and the POOL SANA Pro 400 AQUA Plus 6 sand filter system, also Made in Germany.
Related products
Aluminum wall oval pool PS HQ 7.00 x 3.50 x 1.50 m aluminum hand…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 30.5 m³. General information on aluminum-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing steel, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection of the...
PS30 rectangular pool POOLSANA 8.00 x 4.00 x 1.50 m 4D foil…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 45 m³, number of insulating blocks: 125 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the reinforcement may need to be adjusted.
PS3080 rectangular pool 6.00×3.00×1.50m PROFI set high level…
Pool depth 150 cm, water depth approx. 142-144 cm, capacity approx. 25.5 m³, number of insulating blocks: 95 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the type of reinforcement may need to be adjusted.
Single pool steel wall oval pool PS HQ 4.90 x 3.00 x 1.20 …
Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 14 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing steel, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection of the...
Single pool, steel wall round pool POOLSANA HQ 4.50 x 1.20 m
Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 17.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...
Single steel-walled figure-eight pool POOLSANA HQ 6.25 x 3,…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 28.5 m³. General information on steel-walled figure-eight pools: All figure-eight pools (1.20 m and 1.35 m) can be installed either freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. A base slab is required for all figure-eight pools, into which the included steel support structure, consisting of two side supports and one...
Steel wall round pool POOLSANA PQ 4.00 x 1.20 m PURE set F…
Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 14 m³. General information on steel-walled round pools: All round pools 1.20 m and 1.35 m can be installed either freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the swimming pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or...
Steel-walled round pool with iron mica coating, aluminum handrail, and foil…
Pool depth 125 cm, water depth approx. 110-115 cm, capacity approx. 14.5 m³. General information on steel-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required, regardless of the pool size...