Round pool, aluminum PS HQ, 5.00 x 1.25 m, aluminum handrail 0.8 mm …
2,42 €
Pool depth 125 cm, water depth approx. 110-115 cm, capacity approx. 22.5 m³. General information on aluminum-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, a concrete base slab is required – regardless of the pool size…
Description
Round pool POOL SANA HQ – Made in Germany – consisting of a 1 mm thick aluminum wall in silver-gray/white aluminum + a precisely fitting, sand-colored 0.8 mm PVC pool liner with a hanging bead + a combination handrail made of high-quality and sturdy aluminum, as well as plastic base rails. The PLUS set includes a 300 g/m² underlay, built-in skimmer and inlet nozzle, POOL SANA Pro 400 AQUA Plus 6 sand filter system (Made in Germany) including filter sand, PROFI hose set (Ø 38 mm), and a stainless steel ladder…
Related products
Aluminum mounting profiles for solid pools
The aluminum mounting profiles are attached to the pool edge and serve as liner holders. Profile width approx. 11 cm. Scope of delivery: Rectangular pool 5.00 x 3.00 m: 8 profiles at 2 m each (16 linear meters); Rectangular pool 6.00 x 3.00 m: 9 profiles at 2 m each (18 linear meters); Rectangular pool 7.00 x 3.50 m: 11 profiles at 2 m each (22 linear meters); Rectangular pool 8.00 x 4.00 m: 12 profiles at 2 m each (24 linear meters)
Rectangular pool 8.00 x 4.00 x 1.50 m PROFI set high level …
Pool depth 150 cm, water depth approx. 142-144 cm, capacity approx. 45 m³, number of insulating blocks: 125 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the reinforcement may need to be adjusted.
Round pool PS SQ 3.50×1.35m aluminum handrail 4D foil 0.9 m…
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 12 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or...
Single oval pool PS SQ 7.00 x 3.50 x 1.50 m aluminum…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 30.5 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection...
Single steel-walled round pool PS HQ 3.00 x 1.35 m Fol…
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 9 m³. General information on steel-walled round pools: All round pools 1.20 m and 1.35 m can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the swimming pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or...
Steel wall round pool POOLSANA HQ with aluminum handrail 3.00 x 1,…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 10 m³. General information on steel-walled round pools: All round pools 1.20 m and 1.35 m can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the swimming pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or...
Steel-walled figure-eight pool PS HQ 5.25 x 3.20 x 1.35 m liner…
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 20 m³. General information on steel-walled figure-eight pools: All figure-eight pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. A base slab is required for all figure-eight pools, into which the included steel support structure, consisting of two side supports and one base plate, is installed.
Steel-walled round pool PS HQ 3.00 x 1.20 m, liner 0.8 mm sand …
Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 7.5 m³. General information on steel-walled round pools: All round pools 1.20 m and 1.35 m can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the swimming pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or other factors.