Cuttable stainless steel pool ladder COMFORT 3-step for mounting…
428,34 €
Very stable ASTRALPOOL swimming pool ladder with ladder stiles made of highly polished V2A stainless steel with a stile diameter of 43 mm. The pool ladder has three non-slip plastic steps on each side and a central ladder platform and is suitable for above-ground pools up to 1.00 m deep. If the swimming pool is partially sunk into the ground, the ladder stiles located on the outside of the pool can easily be shortened accordingly with a hacksaw, possibly removing some steps.
Related products
Oval pool POOLSANA HQ 7.00 x 3.50 x 1.50 m with aluminum handrail…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 30.5 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection...
PS3080 rectangular pool 8.00×4.00×1.50m PROFI set High Level…
Pool depth 150 cm, water depth approx. 142-144 cm, capacity approx. 45 m³, number of insulating blocks: 125 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the reinforcement may need to be adjusted.
PVC combination handrail for figure-eight pools 6.25 x 3.60 m, color…
The combination handrail features a groove on the side for securing the liner and is suitable for both pool liners with a hanging bead and those with a wedge bead. In the first case, the bead welded to the liner is hooked over the steel wall, and then the handrail is attached. When replacing the liner, the old pool liner is cut along the handrail, and the new liner, which also has a wedge bead, is then installed using the handrail.
Round pool PS HQ 6.00 x 1.50 m, aluminum handrail, 0.8mm liner…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 39.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...
Single pool steel wall oval pool POOLSANA HQ 4.90 x 3.00 x…
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 16 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing steel, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection of the...
Single pool steel wall oval pool PS HQ 6.00 x 3.20 x 1.50 …
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 23.5 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After assembly, the ends of the oval pool are backfilled with lean concrete. For disinfection...
Steel wall round pool POOLSANA HQ with aluminum handrail 4.00 x 1,…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 17.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...
Steel-walled figure-eight pool PS HQ 6.25 x 3.60 x 1.50 m with aluminum…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 28.5 m³. General information on steel-walled figure-eight pools: All figure-eight pools (1.20 m and 1.35 m) can be installed either freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. A base slab is required for all figure-eight pools, into which the included steel support structure, consisting of two side supports and one...