PURE stainless steel pool ladder, narrow/wide 3-step
246,84 €
narrow-profile swimming pool ladder made of V2A stainless steel with a 43 mm diameter stiles, offering excellent value for money. On the inside of the pool, the stiles are fitted with plastic buffers that support the ladder against the pool wall without chafing the liner. On the outside of the pool, the ladder is secured using plastic mounting sleeves that are cemented flush with the ground and serve as anchor points for the ladder stiles. Alternative…
Related products
PS30 rectangular pool POOLSANA 6.00 x 3.00 x 1.50 m 4D foil…
Pool depth 150 cm, water depth approx. 142-144 cm, capacity approx. 25.5 m³, number of insulating blocks: 95 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the type of reinforcement may need to be adjusted.
Round pool Alu PS SQ 4.00 x 1.50 m Alu handrail 0.9 mm …
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 17.5 m³. General information on aluminum-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, a concrete base slab is required – regardless of the pool size…
Round pool PS SQ 3.50 x 1.35 m, aluminum handrail, 1.0 mm liner…
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 12 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or...
Single pool steel wall oval pool POOLSANA SQ 5.25 x 3.20 x…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 20.5 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After assembly, the ends of the oval pool are backfilled with lean concrete. For disinfection...
Single pool, steel wall round pool PS SQ 6.00 x 1.50 m with A…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 39.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...
Single round pool PS HQ 5.00 x 1.25 m with aluminum wall…
Pool depth 125 cm, water depth approx. 110-115 cm, capacity approx. 22.5 m³. General information on aluminum-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, a concrete base slab is required – regardless of the pool size…
Stainless steel professional pool ladder, wide-reaching, 4-step AST…
High-gloss polished, wide-set swimming pool ladder made of V2A stainless steel. The stiles have a diameter of 43 mm and feature four sturdy and secure stainless steel steps, each with two elegant black, non-slip plastic treads. The steps come with a protective film that must be removed before installation. On the inside of the pool, the stiles are fitted with plastic buffers to support the ladder against the pool wall without chafing the liner.