PREMIUM PE pool cover for round pools
24,20 €
Pool covers protect pool water from natural contaminants and significantly reduce the frequency of pool cleaning. This particularly tear-resistant cover is made of coated PE woven fabric with eyelets and a tensioning rope with a ratchet. The pool cover prevents algae growth due to its opacity and is suitable for all seasons. The top side of the pool cover is blue, while the underside is coated black. Available diameters include…
Related products
Pool pump POOLSANA Pump 50
Self-priming, reliable pool pump. The POOLSANA Pump 50 impresses above all with its compact design and very high reliability. This TÜV and GS-certified, self-priming pool pump features a pre-filter basket, a drain unit, and comes pre-equipped with a power cable and plug. The pump has a circulation capacity of 4 m³/h at 6 mWS and is ideally suited for swimming pools up to approximately 20 m³ water capacity or for filter tanks with a capacity of...
PS3080 rectangular pool 7.00 x 3.50 x 1.50 m PROFI set Gra…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 34.5 m³, number of insulating blocks: 110 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the type of reinforcement may need to be adjusted...
PS3080 rectangular pool POOLSANA HQ 6.00 x 3.00 x 1.50 m…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 25 m³, number of insulating formwork blocks: 95 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the reinforcement may need to be adjusted.
Sand filter system POOLSANA Plus 400Pump 100
Heavy-duty and pressure-resistant filter tank Made in Germany. The sand filter tank with a diameter of 400 mm is made of polypropylene and is particularly impressive due to its high-quality workmanship and high pressure resistance of up to 1.5 bar. In combination with the self-priming, plug-and-play pool pump, which has a circulation capacity of approximately 8 m³/h at 6 mWs, 550 watts, 230 V, the system is very well suited for swimming pools up to approximately 40 m³. Filling capacity...
Set of 1 x COMPACT LED pool spotlight, white, 40 W, including safety device…
Create stunning accents and make your pool a real eye-catcher, even in the evening, with beautiful underwater lighting. Our flat LED pool lights bathe the water's surface in a pleasant light, creating a relaxing atmosphere by the pool. Equipped with a small recessed niche, this light is particularly well-suited for installation in curved steel walls, so you don't have to forgo beautiful lighting even with a round pool. Another...
Single oval pool POOLSANA HQ 7.00 x 3.50 x 1.50 m with aluminum …
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 30.5 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection...
Steel wall round pool POOLSANA PQ 4.00 x 1.35 m PURE set F…
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 15.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...
Steel wall round pool PS HQ 5.00 x 1.35 m, liner 0.8 mm sand …
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 24.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...