SPECK Pool Pump SuperPro 11
532,40 €
High-quality premium pool pump SPECK pumps. For over 100 years, the name SPECK has stood like no other for quality filter pumps made in Germany. The SPECK BADU SuperPro is a monobloc pump with an integrated strainer. A bellows mechanical seal is mounted on the plastic impeller hub. The motor/pump shaft does not come into contact with the circulating water, thus ensuring separation of live and water-carrying parts. The SuperPro series…
SKU:
230443
Category: New products
Description
Premium SPECK pool pump, made in Germany, TÜV and GS certified. Powerful and self-priming. Circulation capacity 13 m³/h at 6 mWs. Water connection 50 mm. Fittings included. Power consumption 690 watts, 230 V, 1 N. Includes power cable with plug.
Additional information
| Weight | 12,01 kg |
|---|
Related products
Pool Full-Inverter Heat Pump POOLSANA InverPEARL 10
1 652,86 €
1. Innovative Technology and Outstanding Design The standout feature of InverPEARL heat pumps is the integrated LED lighting, which adorns the lower part of the front panel, extending almost across the entire width of the unit. The light is not only visually appealing but also indicates the current operating status of the heat pump, depending on its color: Blue light: The heat pump is operating and functioning without problems. Green light: The heat pump is...
Pool heat pump POOLSANA InverPRESTIGE PRO 18
2 301,42 €
1. Extremely high energy efficiency. Based on the InverPRESTIGE series, the PRO models take energy efficiency to the next level, consistently achieving COP (coefficient of performance) values of over 20. This not only saves money but also protects the environment, as the heat energy supplied to the pool water far exceeds the electricity consumed. Our InverPRESTIGE PRO series also scores highly in terms of appearance. The heat pump housing...
PS3080 rectangular pool POOLSANA HQ 6.00 x 3.00 x 1.50 m…
7,26 €
Pool depth 150 cm, water depth approx. 142-144 cm, capacity approx. 25.5 m³, number of insulating blocks: 95 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the type of reinforcement may need to be adjusted.
Round pool Alu PS SQ 3.00 x 1.25 m Alu handrail 1.0 mm …
2,42 €
Pool depth 125 cm, water depth approx. 110-115 cm, capacity approx. 8 m³. General information on aluminum-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size.
Round pool PS SQ 4.00 x 1.20 m, aluminum handrail, 1.0 mm liner…
2,42 €
Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 14 m³. General information on steel-walled round pools: All round pools 1.20 m and 1.35 m can be installed either freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the swimming pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or...
Single round pool PS SQ 4.00 x 1.50 m with aluminum wall…
2,42 €
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 17.5 m³. General information on aluminum-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, a concrete base slab is required – regardless of the pool size…
Steel wall oval pool POOLSANA HQ 7.00 x 3.50 x 1.50 m PLUS set
2,42 €
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 30.5 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection...
Steel-walled figure-eight pool PS HQ 5.25 x 3.20 x 1.35 m liner…
2,42 €
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 20 m³. General information on steel-walled figure-eight pools: All figure-eight pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. A base slab is required for all figure-eight pools, into which the included steel support structure, consisting of two side supports and one base plate, is installed.
