PROMO stainless steel 3-step hook-on ladder, narrow flare
196,02 €
narrow-profile swimming pool ladder made of V2A stainless steel with a 43 mm diameter stiles, offering excellent value for money. The stiles are fitted with plastic caps on the inside of the pool, providing support against the pool wall without chafing the liner. On the outside of the pool, the ladder is secured using plastic mounting sleeves that are cemented flush with the ground and serve as anchor points for the stiles. Alternatively…
SKU:
223416
Category: New products
Description
Clip-on pool ladder with narrow projection, Ø 43 mm ladder stiles made of V2A stainless steel, 3 non-slip stainless steel steps with elegant plastic treads. For in-ground pools between 1.20 m and 1.35 m deep. Load capacity up to 110 kg.
Additional information
| Weight | 9,86 kg |
|---|
Related products
MTH Air Protect UNI blue rectangular pool cover with rope
636,46 €
For optimal pool protection in winter, choose the inflatable AIR PROTECT cover from MTH, designed for rectangular pools. Both the top and bottom surfaces are made of woven-reinforced PVC, each weighing 580 g/m². When inflated, this double-layered cover forms a uniform dome over the pool, providing excellent protection. Rainwater, dirt, and even snow are prevented from entering your pool. A valve inlet adapter (diameter...) is included.
Pool cleaning brush with side brushes PROFI
9,68 €
This classic manual pool cleaner, with its lower and side brushes, offers particularly efficient cleaning not only on the pool floor but also on the pool walls. Thanks to the brush material used, this cleaner can also be used in vinyl liner pools. Furthermore, the weighted housing makes it easier to handle in the water. The adapter for the telescopic pole is included. The upper part of the brush also features...
PS3080 rectangular pool 8.00 x 4.00 x 1.50 m PROFI set Sanitary ware…
12,10 €
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 45 m³, number of insulating blocks: 125 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the reinforcement may need to be adjusted.
PS3080 rectangular pool POOLSANA HQ 6.00 x 3.00 x 1.50 m…
7,26 €
Pool depth 150 cm, water depth approx. 142-144 cm, capacity approx. 25.5 m³, number of insulating blocks: 95 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the type of reinforcement may need to be adjusted.
Single oval pool PS SQ 7.00 x 3.50 x 1.50 m aluminum…
2,42 €
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 30.5 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection...
Single steel-walled round pool PS SQ 4.00 x 1.50 m with A…
2,42 €
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 17.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...
Steel wall oval pool POOLSANA HQ 7.00 x 3.50 x 1.50 m PROFI…
2,42 €
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 30.5 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection...
Steel wall oval pool POOLSANA HQ with aluminum handrail 8.00 x 4,…
4,84 €
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 40 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing steel, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection of the...
