Automatic dosing system POOLSANA Premium Duo pHChlor
1 018,82 €
Compact Premium pH and Chlorine Dosing System: With our POOLSANA Premium Duo, you acquire a visually appealing measuring and control system for the pH and chlorine levels of your swimming pool, suitable for the automated addition of pH Minus or pH Plus as well as liquid chlorine. Integrated into the filter circuit, the system continuously measures the pH and redox values of the pool water. If deviations occur compared to the adjustable target values, the peristaltic pumps are automatically…
Description
Compact, easy-to-use pH and chlorine measuring and dosing system. Suitable for pools up to 120 m³. Display for setting and showing pH and redox values. Desired pH value adjustable between 7 and 7.6 in 0.1 increments. Desired redox value adjustable between 350 and 850 mV in 10 mV increments. Integrated peristaltic pumps. Includes pH and redox probes, calibration solutions, and tapping saddles for integration into the filter circuit.
Additional information
| Weight | 2 kg |
|---|
Related products
Pool heat pump connection set Ø 50 mm
Connection kit for integrating the heat pump into the existing filter circuit via a bypass line with a pipe cross-section of 50 mm. Thanks to the ball valves included in the kit, the water pressure can be adjusted at any time to the changing outside temperature. The adhesive and cleaner are formulated to be suitable and sufficient for the bonding areas. Consisting of: 1 x roll of SpaFlex hose (12 m), 3 x 2-way ball valves (50 mm), 2 x T-pieces (50 mm), 2 x elbows (50 mm, 90°), 1 x PVC re-cable...
PS30 rectangular pool POOLSANA 5.00 x 3.00 x 1.50 m 4D foil…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 21 m³, number of insulating formwork blocks: 85 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the reinforcement may need to be adjusted.
PS30 rectangular pool POOLSANA 6.00 x 3.00 x 1.50 m 4D foil…
Pool depth 150 cm, water depth approx. 142-144 cm, capacity approx. 25.5 m³, number of insulating blocks: 95 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the type of reinforcement may need to be adjusted.
Round pool PS HQ 3.00 x 1.35m, aluminum handrail, 0.8mm liner…
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 9 m³. General information on steel-walled round pools: All round pools 1.20 m and 1.35 m can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the swimming pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or...
Round pool PS SQ 4.50 x 1.35 m, aluminum handrail, 1.0 mm liner…
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 20 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or...
Single pool, steel wall round pool POOLSANA HQ 3.00 x 1.50 m…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 10 m³. General information on steel-walled round pools: All round pools 1.20 m and 1.35 m can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the swimming pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or...
Single steel-walled round pool PS SQ 3.50 x 1.35 m with A…
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 12 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or...