Film repair set with 4D film sand
14,52 €
Technicoll 8002 is specially formulated for bonding soft PVC films, vinyl, and rigid PVC to each other and to textiles, wood, paper, and cardboard. Repairs to PVC swimming pool and pond liners can even be carried out underwater. The adhesive has good vinyl and PVC dissolving properties and contains solvents. Instructions for use: The surfaces to be bonded must be clean and free of grease. Cut a piece of the enclosed film to fit the repair area. [The last sentence appears to be incomplete and requires context to be translated accurately.]
Related products
Complete set of POOLSANA combination special handrail for Value-…
The combination handrail features a groove on the side for securing the liner and is suitable for both pool liners with a hanging bead and those with a wedge bead. In the first case, the bead welded to the liner is hooked over the steel wall, and then the handrail is attached. When replacing the liner, the old pool liner is cut along the handrail, and the new liner, which also has a wedge bead, is then installed using the handrail.
Oval pool POOLSANA HQ 4.90 x 3.00 x 1.50 m with aluminum handrail…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 17.5 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection...
PS30 rectangular pool POOLSANA 5.00 x 3.00 x 1.50 m 4D foil…
Pool depth 150 cm, water depth approx. 142-144 cm, capacity approx. 21.5 m³, number of insulating blocks: 85 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the type of reinforcement may need to be adjusted.
Round pool PS HQ 3.00 x 1.20m, aluminum handrail, 0.8mm liner…
Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 7.5 m³. General information on steel-walled round pools: All round pools 1.20 m and 1.35 m can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the swimming pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or other factors.
Round pool PS HQ 4.00 x 1.20 m, aluminum handrail, 0.8mm liner…
Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 14 m³. General information on steel-walled round pools: All round pools 1.20 m and 1.35 m can be installed either freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the swimming pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or...
Round pool, aluminum PS HQ, 4.50 x 1.50 m, aluminum handrail 0.8 mm …
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 22 m³. General information on aluminum-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required regardless of the pool size...
Steel-walled figure-eight pool PS HQ 5.25 x 3.20 x 1.35 m liner…
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 20 m³. General information on steel-walled figure-eight pools: All figure-eight pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. A base slab is required for all figure-eight pools, into which the included steel support structure, consisting of two side supports and one base plate, is installed.
Steel-walled round pool with iron mica coating, aluminum handrail, and foil…
Pool depth 125 cm, water depth approx. 110-115 cm, capacity approx. 18 m³. General information on steel-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, a concrete base slab is required – regardless of the pool size…