Film repair set with 4D film anthracite
14,52 €
Technicoll 8002 is specially formulated for bonding soft PVC films, vinyl, and rigid PVC to each other and to textiles, wood, paper, and cardboard. Repairs to PVC swimming pool and pond liners can even be carried out underwater. The adhesive has good vinyl and PVC dissolving properties and contains solvents. Instructions for use: The surfaces to be bonded must be clean and free of grease. Cut a piece of the enclosed film to fit the repair area. [The last sentence appears to be incomplete and requires context to be translated accurately.]
Related products
Aluminum wall oval pool PS HQ 6.00 x 3.20 x 1.50 m aluminum handrail…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 23.5 m³. General information on aluminum-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection of the...
POOLSANA Patrol pool robot for floor, wall, and water level…
Versatile all-rounder with optimized traction. This reliable and very handy pool robot (41 x 37 x 34 cm) cleans the floor, walls, and waterline. The POOLSANA Patrol features a large-capacity filter basket with mesh plates that can filter out dirt particles down to 50 µm. A foam insert filter, which can be used for particularly fine dirt, is also included. The filter unit is easily removable from the top...
Rectangular pool 8.00 x 4.00 x 1.50 m PLUS set Blue Under…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 45 m³, number of insulating blocks: 125 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the reinforcement may need to be adjusted.
Round pool PS SQ 4.00 x 1.35 m, aluminum handrail, 4D liner 0,…
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 15.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...
Round pool PS SQ 4.00 x 1.35 m, aluminum handrail, 4D liner 0,…
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 15.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...
Single pool steel wall oval pool POOLSANA HQ 6.00 x 3.20 x…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 23.5 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After assembly, the ends of the oval pool are backfilled with lean concrete. For disinfection...
Steel-walled figure-eight pool PS HQ 4.70 x 3.00 x 1.20 m liner…
Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 15.5 m³. General information on steel-walled figure-eight pools: All figure-eight pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. A base slab is required for all figure-eight pools, into which the included steel support structure, consisting of two side supports and one...
Steel-walled figure-eight pool PS HQ 5.25 x 3.20 x 1.20 m liner…
Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 17.5 m³. General information on steel-walled figure-eight pools: All figure-eight pools (1.20 m and 1.35 m) can be installed either freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. A base slab is required for all figure-eight pools, into which the included steel support structure, consisting of two side supports and one...