Nano sponge POOLSANA MagicGomm
2,42 €
Nano sponges developed specifically for cleaning pool liners. The material dissolves during use, removing stains even without cleaning agents. The dirt is essentially erased from the liner. Contents: 2 x large sponges, 3 x small sponges. Product presentation video created by a long-time POOL SANA customer, YouTube channel TomTuT.
Related products
4D pool liner for rectangular pools, 0.9 mm, green
Pool Liner Made in Germany: This pool liner is manufactured in Germany in compliance with the highest quality standards. The work is carried out by skilled professionals, some of whom have decades of experience. The innovative and completely new 4D pool liner gives your pool an unparalleled interior lining. 4D expands the surface properties of a conventional pool liner by adding two more dimensions at once...
PS30 rectangular pool POOLSANA HQ 8.00 x 4.00 x 1.50 m foil…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 45 m³, number of insulating blocks: 125 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the reinforcement may need to be adjusted.
Round pool Alu PS SQ 3.50 x 1.25 m Alu handrail 0.9 mm …
Pool depth 125 cm, water depth approx. 110-115 cm, capacity approx. 11 m³. General information on aluminum-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required regardless of the pool size...
Single round pool PS SQ 3.00 x 1.25 m with aluminum wall…
Pool depth 125 cm, water depth approx. 110-115 cm, capacity approx. 8 m³. General information on aluminum-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size.
Single steel-walled round pool PS HQ 3.00 x 1.50 m with A…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 10 m³. General information on steel-walled round pools: All round pools 1.20 m and 1.35 m can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the swimming pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or...
Steel wall oval pool POOLSANA HQ 5.25 x 3.20 x 1.50 m PROFI…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 20.5 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After assembly, the ends of the oval pool are backfilled with lean concrete. For disinfection...
Steel wall oval pool POOLSANA PQ 4.90 x 3.00 x 1.20 m PURE set
Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 14 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing steel, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection of the...
Steel-walled figure-eight pool PS HQ 6.25 x 3.60 x 1.20 m liner…
Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 22.5 m³. General information on steel-walled figure-eight pools: All figure-eight pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. A base slab is required for all figure-eight pools, into which the included steel support structure, consisting of two side supports and one...