Swimming pool skimmer MTH SK 2, glued version…
263,78 €
No installation costs – and the pool liner remains intact. This surface skimmer is well-suited for all above-ground pools, including round and figure-eight pools, as no hole needs to be cut into the pool wall or liner. The overhanging skimmer is simply hung over the pool wall and secured with suction cups. The skimmer is suitable for steel-walled pools with a handrail width of up to 40 mm. The MTH SK 2 features a pre-filter basket. This filters out coarse debris…
Description
For hanging on the pool wall, for steel-walled pools with a handrail width of up to 40 mm. Threaded connection: The outlets each have an internal thread of 1.12 mm and allow integration into all common pipe diameters; suitable adapters are not required.
Additional information
| Weight | 5,92 kg |
|---|
Related products
PS30 rectangular pool PS 5.00 x 3.00 x 1.50 m 4D film 0.9 …
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 21 m³, number of insulating formwork blocks: 85 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the reinforcement may need to be adjusted.
Round pool PS SQ 4.50 x 1.50 m aluminum HL 4D foil 0.9 mm…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 22 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or...
Round pool PS SQ 6.00 x 1.50 m, aluminum handrail, 4D liner 0,…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 39.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...
Round pool, aluminum PS HQ, 5.00 x 1.25 m, aluminum handrail 0.8 mm …
Pool depth 125 cm, water depth approx. 110-115 cm, capacity approx. 22.5 m³. General information on aluminum-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, a concrete base slab is required – regardless of the pool size…
Single pool steel wall oval pool POOLSANA SQ 5.25 x 3.20 x…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 20.5 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After assembly, the ends of the oval pool are backfilled with lean concrete. For disinfection...
Single steel-walled round pool PS HQ 3.50 x 1.20 m with A…
Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 10.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...
Stainless steel professional pool ladder, wide-reaching, 4-step AST…
High-gloss polished, wide-set swimming pool ladder made of V2A stainless steel. The stiles have a diameter of 43 mm and feature four sturdy and secure stainless steel steps, each with two elegant black, non-slip plastic treads. The steps come with a protective film that must be removed before installation. On the inside of the pool, the stiles are fitted with plastic buffers to support the ladder against the pool wall without chafing the liner.
Steel-walled figure-eight pool PS HQ 6.25 x 3.60 x 1.20 m liner…
Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 22.5 m³. General information on steel-walled figure-eight pools: All figure-eight pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. A base slab is required for all figure-eight pools, into which the included steel support structure, consisting of two side supports and one...