4D pool liner for oval pools, 0.9 mm, green
1 379,40 €
Pool Liner Made in Germany: This pool liner is manufactured in Germany in compliance with the highest quality standards. The work is carried out by skilled professionals, some of whom have decades of experience. The innovative and completely new 4D pool liner gives your pool an unparalleled interior lining. 4D expands the surface properties of a conventional pool liner by adding two more dimensions at once…
Related products
Oval pool POOLSANA HQ 7.00 x 3.50 x 1.50 m with aluminum handrail…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 30.5 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection...
Pool solar cover PREMIUM 500 µ OXO Blue/Black for rights…
Pool Solar Cover Made in Germany. This pool solar cover is manufactured in Germany in accordance with the highest quality standards. The welding of the film panels and the cutting to the pool shape are done by hand with dedication and attention to detail. When you purchase this pool solar cover, you receive genuine handcrafted quality. The work is carried out by skilled professionals, some of whom have decades of experience. The renowned...
PROMO 4-step adjustable stainless steel pool ladder for freestanding use…
Very stable swimming pool ladder with ladder stiles made of highly polished V2A stainless steel with a stile diameter of 42 mm. The pool ladder has four non-slip plastic steps on each side and a central ladder platform and is suitable for above-ground pools up to 1.35 m deep. If the swimming pool is partially sunk into the ground, the ladder stiles located on the outside of the pool can easily be shortened accordingly with a hacksaw, potentially removing some steps. After...
PS PREMIUM 500 sand filter system with Speck SuperPRO pump …
Maximum convenience thanks to the two-part tank design. The centrally divided design makes filling and changing the sand particularly easy, making the system ideal for installation in confined spaces such as basements or filter shafts. The two tank halves are connected by a stainless steel clamping ring, which is finished with a visually appealing black protective coating. The tank is made of GRP (glass-reinforced plastic)...
Round pool PS SQ 3.50 x 1.20 m, aluminum handrail, 1.0 mm liner…
Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 10.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...
Round pool PS SQ 4.00 x 1.35 m, aluminum handrail, 1.0 mm liner…
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 15.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...
Single pool aluminum wall oval pool POOLSANA SQ 5.25 x 3.20 x 1…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 20.5 m³. General information on aluminum-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection of the...
Single steel-walled figure-eight pool PS HQ 5.25 x 3.20 x 1…
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 20 m³. General information on steel-walled figure-eight pools: All figure-eight pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. A base slab is required for all figure-eight pools, into which the included steel support structure, consisting of two side supports and one base plate, is installed.