4D pool liner for oval pools, 0.9 mm, blue
1 379,40 €
Pool Liner Made in Germany: This pool liner is manufactured in Germany in compliance with the highest quality standards. The work is carried out by skilled professionals, some of whom have decades of experience. The innovative and completely new 4D pool liner gives your pool an unparalleled interior lining. 4D expands the surface properties of a conventional pool liner by adding two more dimensions at once…
Related products
MTH Air Protect UNI grey round pool cover with rope
For optimal pool protection in winter, choose the inflatable AIR PROTECT PROFI cover for round pools. Both the top and bottom surfaces are made of reinforced PVC fabric, weighing 580 g/m² per side. When inflated, this double-layered cover forms a uniform dome over the pool. This provides optimal protection, preventing rainwater, dirt, and even snow from entering your pool. A valve inlet adapter with a 20 mm diameter connection is included...
PS30 rectangular pool POOLSANA HQ 6.00 x 3.00 x 1.50 m foil…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 25 m³, number of insulating formwork blocks: 95 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the reinforcement may need to be adjusted.
Rectangular pool 6.00 x 3.00 x 1.50 m PROFI set Blue Under…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 25 m³, number of insulating formwork blocks: 95 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the reinforcement may need to be adjusted.
Rectangular pool 7.00 x 3.50 x 1.50 m PLUS set sand under…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 34.5 m³, number of insulating blocks: 110 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the type of reinforcement may need to be adjusted...
Round pool PS HQ 3.00 x 1.20 m, aluminum handrail, 0.8mm liner…
Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 7.5 m³. General information on steel-walled round pools: All round pools 1.20 m and 1.35 m can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the swimming pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or other factors.
Round pool PS SQ 4.50 x 1.50 m, aluminum handrail, 1.0 mm liner…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 22 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or...
Sand filter system POOLSANA PREMIUM 400 with Speck pump POO…
Maximum convenience thanks to the two-part tank design. The centrally divided design makes filling and changing the sand particularly easy, making the system ideal for installation in confined spaces such as basements or filter shafts. The two tank halves are connected by a stainless steel clamping ring, which is finished with a visually appealing black protective coating. The tank is made of GRP (glass-reinforced plastic)...
Steel-walled round pool with iron mica coating, aluminum handrail, and foil…
Pool depth 125 cm, water depth approx. 110-115 cm, capacity approx. 22.5 m³. General information on steel-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, a concrete base slab is required, regardless of the pool size...