Spray adhesive 500 ml
24,20 €
The spray adhesive is used to attach the fleece to the walls of a rectangular pool at specific points. Contents: 500 ml.
Related products
10-pack of plastic clip eyelets for solar films, blue
10 plastic clip eyelets. Ideal for retrofitting to a solar cover to attach a pull cord or fastening strap. Prevents tearing of the film material. No setting tool required. The eyelets have a snap mechanism that securely connects the top and bottom parts when pressed in. Inner diameter 11 mm, outer diameter 28 mm
Pool heat pump POOLSANA InverPRESTIGE 9
1. High Energy Efficiency: Thanks to full inverter technology combined with sophisticated design and control, our InverPRESTIGE heat pumps have a particularly high coefficient of performance (COP). Specifically, this means that the heat pumps deliver many times the heating output they themselves draw from the grid. Our InverPRESTIGE series also scores highly in terms of appearance. The heat pump housing is made of metal with a black protective coating...
Round pool PS SQ 3.50 x 1.20 m, aluminum handrail, 1.0 mm liner…
Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 10.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...
Single round pool PS HQ 4.00 x 1.50 m with aluminum wall…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 17.5 m³. General information on aluminum-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, a concrete base slab is required – regardless of the pool size…
Single steel-walled figure-eight pool PS HQ 4.70 x 3.00 x 1…
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 17.5 m³. General information on steel-walled figure-eight pools: All figure-eight pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. A base slab is required for all figure-eight pools, into which the included steel support structure, consisting of two side supports and one...
SPECK Pool Pump SuperPro 14
High-quality premium pool pump SPECK pumps. For over 100 years, the name SPECK has stood like no other for quality filter pumps made in Germany. The SPECK BADU SuperPro is a monobloc pump with an integrated strainer. A bellows mechanical seal is mounted on the plastic impeller hub. The motor/pump shaft does not come into contact with the circulating water, thus ensuring separation of live and water-carrying parts. The SuperPro series...
Stainless steel professional pool ladder, wide-reaching, 3-step AST…
High-gloss polished, wide-set swimming pool ladder made of V2A stainless steel. The stiles have a diameter of 43 mm and feature three sturdy and secure stainless steel steps, each with two elegant black, non-slip plastic treads. The steps come with a protective film that must be removed before installation. On the inside of the pool, the stiles are fitted with plastic buffers to support the ladder against the pool wall without chafing the liner.
Steel-walled figure-eight pool PS HQ 4.70 x 3.00 x 1.35 m liner…
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 17.5 m³. General information on steel-walled figure-eight pools: All figure-eight pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. A base slab is required for all figure-eight pools, into which the included steel support structure, consisting of two side supports and one...