Swimming pool built-in skimmer 17.5 245 mm
220,22 €
The pool surface skimmer, also called a skimmer, is the link between the sand filter system or pool pump and the pool. The pool skimmer draws water from the surface. This high-quality 17.5 x 245 mm built-in skimmer is made of impact- and pressure-resistant ABS plastic and is primarily suitable for solid pools such as insulated pools, polystyrene pools, and concrete pools. It features 1″ and 12″ internal connections, a 245 mm projection, and a height-adjustable lid. The skimmer basket is included for collecting coarse debris…
Related products
Aluminum wall oval pool PS HQ 6.00 x 3.20 x 1.50 m aluminum handrail…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 23.5 m³. General information on aluminum-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection of the...
Aluminum wall oval pool PS SQ 5.25 x 3.20 x 1.50 m with aluminum handles…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 20.5 m³. General information on aluminum-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection of the...
Aluminum wall round pool PS HQ with aluminum handrail 3.00 x 1.25 m PLU…
Pool depth 125 cm, water depth approx. 110-115 cm, capacity approx. 8 m³. General information on aluminum-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size.
PS30 rectangular pool POOLSANA HQ 6.00 x 3.00 x 1.50 m foil…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 25 m³, number of insulating formwork blocks: 95 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the reinforcement may need to be adjusted.
Round pool Alu PS SQ 3.00 x 1.25 m Alu handrail 0.9 mm …
Pool depth 125 cm, water depth approx. 110-115 cm, capacity approx. 8 m³. General information on aluminum-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size.
Single round pool PS SQ 4.00 x 1.25 m with aluminum wall…
Pool depth 125 cm, water depth approx. 110-115 cm, capacity approx. 14.5 m³. General information on aluminum-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, a concrete base slab is required – regardless of the pool size…
Steel wall oval pool PS HQ 5.25 x 3.20 x 1.50 m foil 0.8…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 20.5 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After assembly, the ends of the oval pool are backfilled with lean concrete. For disinfection...
Swimming pool skimmer MTH SK 2, glued version…
No installation costs – and the pool liner remains intact. This surface skimmer is well-suited for all above-ground pools, including round and figure-eight pools, as no hole needs to be cut into the pool wall or liner. The overhanging skimmer is simply hung over the pool wall and secured with suction cups. The skimmer is suitable for steel-walled pools with a handrail width of up to 40 mm. The MTH SK 2 features a pre-filter basket. This filters out coarse debris...