Floor drain 180 mm ASTRALPOOL
55,66 €
Compact ABS floor drain with a right-angled outlet. This floor drain is a built-in pool component that connects to the sand filter system via the skimmer line to ensure better water circulation in large swimming pools. The floor drain is suitable for steel-walled pools, round pools, figure-eight pools, oval pools, and solid Isostone pools, as well as rectangular and concrete pools. The floor drain is installed in the concrete slab, and the piping is connected to the suction line…
Related products
Aluminum wall oval pool PS SQ 6.00 x 3.20 x 1.50 m with aluminum handrail…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 23.5 m³. General information on aluminum-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection of the...
Rectangular pool 7.00 x 3.50 x 1.50 m PROFI set Grey Bottom…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 34.5 m³, number of insulating blocks: 110 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the type of reinforcement may need to be adjusted...
Sand filter system POOLSANA Plus 400Pump 75
Heavy-duty and pressure-resistant filter tank Made in Germany. The sand filter tank with a diameter of 400 mm is made of polypropylene and is particularly impressive due to its high-quality workmanship and high pressure resistance of up to 1.5 bar. In combination with the self-priming, plug-and-play pool pump, which has a circulation capacity of approximately 6 m³/h at 6 mWs, 450 watts, 230 V, the system is very well suited for swimming pools up to approximately 35 m³. Filling capacity...
Single pool, steel wall round pool POOLSANA HQ 3.00 x 1.50 m…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 10 m³. General information on steel-walled round pools: All round pools 1.20 m and 1.35 m can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the swimming pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or...
Steel wall oval pool PS HQ 6.00 x 3.20 x 1.20 m foil 0.8…
Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 18.5 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection...
Steel wall round pool POOLSANA HQ 5.00 x 1.35 m PLUS set…
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 24.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...
Steel-walled round pool with iron mica coating, aluminum handrail, and foil…
Pool depth 125 cm, water depth approx. 110-115 cm, capacity approx. 8 m³. General information on steel-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required, regardless of the pool size...
Steel-walled round pool with iron mica coating, aluminum handrail, and foil…
Pool depth 125 cm, water depth approx. 110-115 cm, capacity approx. 22.5 m³. General information on steel-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, a concrete base slab is required, regardless of the pool size...