Complete set of POOLSANA combination special handrail for Value-…
70,18 €
The combination handrail features a groove on the side for securing the liner and is suitable for both pool liners with a hanging bead and those with a wedge bead. In the first case, the bead welded to the liner is hooked over the steel wall, and then the handrail is attached. When replacing the liner, the old pool liner is cut along the handrail, and the new liner, which also has a wedge bead, is then installed using the handrail.
Related products
50 VA safety transformer for LED pool lighting
Made in Germany. Short-circuit proof safety transformer that reduces the output voltage to 12 V. The primary side of the transformer is equipped with a 2 m long cable and plug. The secondary side features a PG screw terminal on the housing and connection terminals inside the transformer itself. Suitable for connecting LED lamps up to a maximum of 50 watts. Technical specifications: Input/Output 230 V / 12 V, 50/60 Hz. Protection class IP 65. Thermal switch 110°C. Dimensions: 170 x 131 x 81 mm.
Inlet nozzle for hose connection
The pool nozzle is a built-in swimming pool component that returns water from the sand filter system, via the pool piping, back into the pool. This inlet nozzle is ideally suited for above-ground steel-walled pools, including round and figure-eight pools, where the pool piping remains easily accessible. The nozzle eye is individually adjustable. The nozzle is easy to install and suitable for 3238 mm hose piping. The recommended hole size for the steel wall is 60 mm. Seals are, of course, included.
Pool heat pump POOLSANA InverPRESTIGE 9
1. High Energy Efficiency: Thanks to full inverter technology combined with sophisticated design and control, our InverPRESTIGE heat pumps have a particularly high coefficient of performance (COP). Specifically, this means that the heat pumps deliver many times the heating output they themselves draw from the grid. Our InverPRESTIGE series also scores highly in terms of appearance. The heat pump housing is made of metal with a black protective coating...
Pool liner for rectangular pools, sand
Pool Liner Made in Germany: This pool liner is manufactured in Germany in compliance with the highest quality standards. From the production of the raw material into liner sheets to the finishing and welding together to create a complete pool lining, this pool liner guarantees you exclusively quality Made in Germany. The work is carried out by skilled professionals, some of whom have decades of experience. As a testament to our own conviction...
PS3080 rectangular pool 8.00 x 4.00 x 1.50 m PROFI set Gra…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 45 m³, number of insulating blocks: 125 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the reinforcement may need to be adjusted.
Round aluminum pool PS SQ 4.50 x 1.25 m, aluminum handrail 0.9 mm …
Pool depth 125 cm, water depth approx. 110-115 cm, capacity approx. 18 m³. General information on aluminum-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required regardless of the pool size...
Single oval pool POOLSANA HQ 7.00 x 3.50 x 1.50 m with aluminum…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 30.5 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection...
Steel wall oval pool POOLSANA HQ 8.00 x 4.00 x 1.50 m with…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 40 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing steel, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection of the...