Flow switch for POOLSANA UV disinfection unit
137,94 €
Dry-run protection: Switches the connected device on or off depending on whether water is flowing or not. Specifically designed for UV disinfection units, but can also be used for other electrical products up to 10 A 2300 W. Electrical connection: The device comes pre-equipped with a power cord, Schuko plug, and a socket. Water connection: Special T-piece with a mounting opening for the paddle switch (see adjacent image)…
Related products
1-piece set of POOLSANA PROFI pool spotlights with LED bulb…
PAR56 Recessed Underwater Spotlight with 20W White LED Bulb. High-quality underwater spotlight made of impact- and pressure-resistant ABS for installation in straight pool walls, rectangular pools, and the straight sides of oval pools. The spotlight is equipped with a modern, energy-efficient LED bulb with a 316LV4A stainless steel backplate, which produces a very bright light of approximately 2,000 lumens at a maximum power consumption of 20W. For oval or rectangular pools, the underwater spotlight...
Aluminum wall oval pool PS HQ 8.00 x 4.00 x 1.50 m with aluminum handle…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 40 m³. General information on aluminum-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection of the pool...
Pool floor cleaner Alu Professional
45 cm wide pool cleaner made of high-quality aluminum for skimmer connection. At 2.6 kg, the cleaner is relatively heavy, making it particularly easy to hold underwater. The bristles on the underside of the pool cleaner are mounted on a rail that yields under pressure, thus protecting the pool liner. Two additional rubber lips along the suction area ensure optimal cleaning results. The swivel hose connector is compatible with suction hoses with...
Pool liner 1.0 mm for figure-eight pools, blue
Pool Liner Made in Germany: This pool liner is manufactured in Germany in compliance with the highest quality standards. From the production of the raw material into liner sheets to the finishing and welding together to create a complete pool lining, this pool liner guarantees you exclusively quality Made in Germany. The work is carried out by skilled professionals, some of whom have decades of experience. As a testament to our own conviction...
PS30 rectangular pool POOLSANA 6.00 x 3.00 x 1.50 m 4D foil…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 25 m³, number of insulating formwork blocks: 95 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the reinforcement may need to be adjusted.
Single pool steel wall oval pool POOLSANA PQ 7.00 x 3.50 x…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 30.5 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection...
Single steel-walled round pool PS HQ 3.50 x 1.20 m with A…
Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 10.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...
Steel wall oval pool PS HQ 7.00 x 3.50 x 1.50 m foil 0.8…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 30.5 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection...