Salinator C20P
1 783,54 €
Out of stock
The saline chlorinators allow you to keep the water in your pool clean and crystal-clear, without adding chemical disinfectants. The system of saline chlorination for swimming pools, manufactures the chlorine directly in the filter installation by means of water electrolysis slightly salty. “Free chlorine” (hypochlorous acid, HOCL) is produced, which is a strong bactericide. An important characteristic of the system is that it is reversible, that means, after oxidising the bacteria, chlorine reverts back to common salt and water. It is not necessary to add any chemical product (algaecides, cyanuric acid, etc.)
which helps keeping the water unpolluted. Slightly salt water is healthier than pure water: the skin wrinkles less and eye irritation is reduced. The equipment is made of an electronic control unit of command and regulation and an electrolytic cell through which runs the pool water normally settled in
the return of the filtration circuit. If the chlorinator keeps working permanently, it will not be necessary to replace the water for many years, and you will collaborate with the environmental politics of water savings.
| Weight | 4,5 kg |
|---|---|
| Dimensions | 0,4 × 0,5 × 0,2 cm |
Related products
Poolmatix salt water, pH + ORP, 400V
The basis of the system is an intelligent central unit, which is integrated into the pool switchboard, usually located in the technology room. Poolmatix independently receives data from intelligent sensors to measure water properties and operating conditions, and uses this data to control the operation of water treatment and heating units (e.g. dosing station, salinator or heat pump). It also controls other pool technologies to enhance user comfort - e.g. lighting, counter-current or gargoyle. The system stores the measured data, evaluates it and uses it to perform advanced diagnostics of the operation, thus preventing potential malfunctions.
Salinator SL50/ Smart C15P without probes
A salinator is a device that helps you keep the water in your pool crystal clear. The dissolved salt in the water is gradually converted into chlorine, which has a purifying function. Salination is one of the most effective ways of disinfecting pool water. A microprocessor-controlled electrolysis system produces natural chlorine from the salt water, which reliably kills bacteria, viruses and algae in the form of hypochlorous acid.
Salinator SL75/ Smart C20P without probes
A salinator is a device that helps you keep the water in your pool crystal clear. The dissolved salt in the water is gradually converted into chlorine, which has a purifying function. Salination is one of the most effective ways of disinfecting pool water. A microprocessor-controlled electrolysis system produces natural chlorine from the salt water, which reliably kills bacteria, viruses and algae in the form of hypochlorous acid.
Submersible level sensor (max. level height 1.5 m)
This sensor monitors the water level in the balancing tank and reacts to changes. The system can detect activity in the pool and automatically start circulation. It also enables automatic refilling and notifies the user in the event of the refill malfunction and low water levels.
If the level drops below the critical level, Poolmatix switches off equipment to prevent damage and notifies the user.