without probes
Salinator C15P
1 715,78 €
Only 2 left in stock
Description
The saline chlorinators allow you to keep the water in your pool clean and crystal-clear, without adding chemical disinfectants. The system of saline chlorination for swimming pools, manufactures the chlorine directly in the filter installation by means of water electrolysis slightly salty. “Free chlorine” (hypochlorous acid, HOCL) is produced, which is a strong bactericide. An important characteristic of the system is that it is reversible, that means, after oxidising the bacteria, chlorine reverts back to common salt and water. It is not necessary to add any chemical product (algaecides, cyanuric acid, etc.)
which helps keeping the water unpolluted. Slightly salt water is healthier than pure water: the skin wrinkles less and eye irritation is reduced. The equipment is made of an electronic control unit of command and regulation and an electrolytic cell through which runs the pool water normally settled in
the return of the filtration circuit. If the chlorinator keeps working permanently, it will not be necessary to replace the water for many years, and you will collaborate with the environmental politics of water savings.
Additional information
| Weight | 3,5 kg |
|---|---|
| Dimensions | 0,4 × 0,5 × 0,2 cm |
Related products
Chlorinator 3 kg
The pool tablet dispenser is suitable for all Azuro Vario above-ground pools and Ibiza Family in-ground pools. It is intended for dosing chlorine and multifunctional tablets. Installation in the pool pipeline is done using tubes, it can also be installed in existing pool distribution systems. The amount of chlorine flowing into the pool can be regulated by a valve, this will ensure an even distribution of chlorine into the pool. Thanks to the large volume of the tablet tank, you can put a large number of tablets in it, which will last you several weeks.
Poolmatix salt water, pH + ORP, 230V
The basis of the system is an intelligent central unit, which is integrated into the pool switchboard, usually located in the technology room. Poolmatix independently receives data from intelligent sensors to measure water properties and operating conditions, and uses this data to control the operation of water treatment and heating units (e.g. dosing station, salinator or heat pump). It also controls other pool technologies to enhance user comfort - e.g. lighting, counter-current or gargoyle. The system stores the measured data, evaluates it and uses it to perform advanced diagnostics of the operation, thus preventing potential malfunctions.
