PREMIUM underlay fleece, pack IV 36 m², quality 500 g/m²
140,36 €
Very strong, thermally and mechanically bonded, rot-proof underlay fleece for protecting the pool liner from PVC-incompatible materials, min. 500 g/m². Recommended for the following swimming pools from our range: Round pool 6.00 m, Oval pool 7.50 x 3.50 m, Oval pool 8.00 x 4.00 m, Figure-eight pool 7.25 x 4.60 m. The fleece is supplied in rolls 2 m wide and 18 m long. Due to manufacturing and packaging reasons, the fleece cannot always be delivered in one piece.
Related products
50 VA safety transformer for LED pool lighting
Made in Germany. Short-circuit proof safety transformer that reduces the output voltage to 12 V. The primary side of the transformer is equipped with a 2 m long cable and plug. The secondary side features a PG screw terminal on the housing and connection terminals inside the transformer itself. Suitable for connecting LED lamps up to a maximum of 50 watts. Technical specifications: Input/Output 230 V / 12 V, 50/60 Hz. Protection class IP 65. Thermal switch 110°C. Dimensions: 170 x 131 x 81 mm.
Round aluminum pool PS SQ 4.50 x 1.25 m, aluminum handrail 1.0 mm …
Pool depth 125 cm, water depth approx. 110-115 cm, capacity approx. 18 m³. General information on aluminum-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required regardless of the pool size...
Round pool Alu PS SQ 4.00 x 1.25 m Alu handrail 0.9 mm …
Pool depth 125 cm, water depth approx. 110-115 cm, capacity approx. 14.5 m³. General information on aluminum-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, a concrete base slab is required – regardless of the pool size…
Round pool PS SQ 5.00 x 1.50 m, aluminum handrail, 1.0 mm liner…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 27.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...
Round pool, aluminum PS HQ, 3.50 x 1.25 m, aluminum handrail 0.8 mm …
Pool depth 125 cm, water depth approx. 110-115 cm, capacity approx. 11 m³. General information on aluminum-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required regardless of the pool size...
Single pool steel wall oval pool POOLSANA HQ 8.00 x 4.00 x…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 40 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing steel, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection of the...
Single steel-walled round pool PS HQ 3.50 x 1.35 m with A…
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 12 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or...
Single steel-walled round pool PS SQ 4.00 x 1.35 m with A…
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 15.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...