PREMIUM underlay fleece, pack IV 36 m², quality 500 g/m²
140,36 €
Very strong, thermally and mechanically bonded, rot-proof underlay fleece for protecting the pool liner from PVC-incompatible materials, min. 500 g/m². Recommended for the following swimming pools from our range: Round pool 6.00 m, Oval pool 7.50 x 3.50 m, Oval pool 8.00 x 4.00 m, Figure-eight pool 7.25 x 4.60 m. The fleece is supplied in rolls 2 m wide and 18 m long. Due to manufacturing and packaging reasons, the fleece cannot always be delivered in one piece.
Related products
Complete set of POOLSANA combination special handrail for Value-…
The combination handrail features a groove on the side for securing the liner and is suitable for both pool liners with a hanging bead and those with a wedge bead. In the first case, the bead welded to the liner is hooked over the steel wall, and then the handrail is attached. When replacing the liner, the old pool liner is cut along the handrail, and the new liner, which also has a wedge bead, is then installed using the handrail.
Filter medium FIBALON rope 350 g
The innovative and patented FIBALON 3D polymer fiber filter consists of a combination of various polymer fibers with different surface structures and cross-sections, developed according to the latest scientific findings. The deliberately chosen spherical shape creates the largest possible filter surface area, and the optimized fiber combination guarantees a separation efficiency of 8 µm. The incorporation of silver ions effectively counteracts the formation of biofilm within the filter...
PoolSANA InverPOWER ULTRA 7 Full Inverter Heat Pump
1. Ultra-high energy efficiency. The name says it all. Thanks to full inverter technology combined with sophisticated design and control, our InverPOWER ULTRA heat pumps have a particularly high COP (coefficient of performance) of over 18, setting completely new standards in efficiency, as their heating output is many times higher than the power they draw from the grid. But the exterior is also impressive. The casing of the InverP...
PS30 rectangular pool POOLSANA SQ 7.00 x 3.50 x 1.50 m foil…
Pool depth 150 cm, water depth approx. 142-144 cm, capacity approx. 35 m³, number of insulating blocks: 110 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the reinforcement may need to be adjusted.
PS3080 rectangular pool 8.00 x 4.00 x 1.50 m PROFI set Gra…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 45 m³, number of insulating blocks: 125 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the reinforcement may need to be adjusted.
Single steel-walled round pool PS HQ 4.00 x 1.35 m with A…
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 15.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...
Steel-walled round pool PS HQ 3.00 x 1.35 m, liner 0.8 mm sand …
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 9 m³. General information on steel-walled round pools: All round pools 1.20 m and 1.35 m can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the swimming pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or...
Steel-walled round pool with iron mica coating, aluminum handrail, and foil…
Pool depth 125 cm, water depth approx. 110-115 cm, capacity approx. 22.5 m³. General information on steel-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, a concrete base slab is required, regardless of the pool size...