Filter medium FIBALON rope 350 g
41,14 €
The innovative and patented FIBALON 3D polymer fiber filter consists of a combination of various polymer fibers with different surface structures and cross-sections, developed according to the latest scientific findings. The deliberately chosen spherical shape creates the largest possible filter surface area, and the optimized fiber combination guarantees a separation efficiency of 8 µm. The incorporation of silver ions effectively counteracts the formation of biofilm within the filter…
Description
Filter medium made of polymer fibers, developed according to DIN EN 16713-1. Made in Germany. Very high dirt holding capacity and separation efficiency. Embedded silver ions prevent bacterial growth in the filter container. 350 g of FIBALON replaces 25 kg of filter sand. FIBALON spheres distributed in 8 interconnected nets. Filter material can be removed and replaced with just one hand.
Additional information
| Weight | 0,35 kg |
|---|
Related products
Oval pool POOLSANA HQ 5.25 x 3.20 x 1.50 m with aluminum handrail…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 20.5 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After assembly, the ends of the oval pool are backfilled with lean concrete. For disinfection...
Rectangular pool 6.00 x 3.00 x 1.50 m PROFI set high level …
Pool depth 150 cm, water depth approx. 142-144 cm, capacity approx. 25.5 m³, number of insulating blocks: 95 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the type of reinforcement may need to be adjusted.
Round pool PS HQ 3.00 x 1.20 m, aluminum handrail, 0.8mm liner…
Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 7.5 m³. General information on steel-walled round pools: All round pools 1.20 m and 1.35 m can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the swimming pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or other factors.
Single oval pool POOLSANA HQ 7.00 x 3.50 x 1.50 m with aluminum…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 30.5 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection...
Single pool steel wall oval pool POOLSANA SQ 7.00 x 3.50 x…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 30.5 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection...
Single steel-walled figure-eight pool POOLSANA HQ 4.70 x 3,…
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 17.5 m³. General information on steel-walled figure-eight pools: All figure-eight pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. A base slab is required for all figure-eight pools, into which the included steel support structure, consisting of two side supports and one...
Single steel-walled round pool PS SQ 4.00 x 1.50 m with A…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 17.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...