Single steel-walled round pool PS SQ 4.00 x 1.50 m with A…
2 359,50 €
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 17.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and…
Description
Steel wall round pool POOL SANA SQ – Made in Germany – consisting of 0.8 mm thick, hot-dip galvanized steel wall + very precisely fitting, blue PVC pool liner 1.0 mm with hanging bead + combination special handrail made of high-quality and stable aluminum as well as bottom rails made of plastic.
Related products
Aluminum wall round pool PS HQ with aluminum handrail 3.00 x 1.25 m PRO…
Pool depth 125 cm, water depth approx. 110-115 cm, capacity approx. 8 m³. General information on aluminum-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size.
Pool heat pump connection set Ø 50 mm
Connection kit for integrating the heat pump into the existing filter circuit via a bypass line with a pipe cross-section of 50 mm. Thanks to the ball valves included in the kit, the water pressure can be adjusted at any time to the changing outside temperature. The adhesive and cleaner are formulated to be suitable and sufficient for the bonding areas. Consisting of: 1 x roll of SpaFlex hose (12 m), 3 x 2-way ball valves (50 mm), 2 x T-pieces (50 mm), 2 x elbows (50 mm, 90°), 1 x PVC re-cable...
PoolSANA InverPEARL 8 Full Inverter Heat Pump
1. Innovative Technology and Outstanding Design The standout feature of InverPEARL heat pumps is the integrated LED lighting, which adorns the lower part of the front panel, extending almost across the entire width of the unit. The light is not only visually appealing but also indicates the current operating status of the heat pump, depending on its color: Blue light: The heat pump is operating and functioning without problems. Green light: The heat pump is...
PS30 rectangular pool POOLSANA SQ 6.00 x 3.00 x 1.50 m foil…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 25 m³, number of insulating formwork blocks: 95 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the reinforcement may need to be adjusted.
Round aluminum pool PS SQ 4.50 x 1.25 m, aluminum handrail 1.0 mm …
Pool depth 125 cm, water depth approx. 110-115 cm, capacity approx. 18 m³. General information on aluminum-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required regardless of the pool size...
Round pool Alu PS SQ 3.00 x 1.25 m Alu handrail 1.0 mm …
Pool depth 125 cm, water depth approx. 110-115 cm, capacity approx. 8 m³. General information on aluminum-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size.
Round pool PS SQ 4.00 x 1.35 m, aluminum handrail, 4D liner 0,…
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 15.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...
Single steel-walled round pool PS SQ 4.50 x 1.50 m with A…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 22 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or...