Single steel-walled round pool PS HQ 4.00 x 1.20 m with A…
1 570,58 €
Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 14 m³. General information on steel-walled round pools: All round pools 1.20 m and 1.35 m can be installed either freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the swimming pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or…
Description
Steel wall round pool POOL SANA HQ – Made in Germany – consisting of 0.6 mm thick, hot-dip galvanized steel wall + very precisely fitting, sand-colored PVC pool liner 0.8 mm with hanging bead + combination special handrail made of high-quality and stable aluminum as well as bottom rails made of plastic.
Additional information
| Weight | 123 kg |
|---|
Related products
Aluminum wall oval pool PS HQ 6.00 x 3.20 x 1.50 m with aluminum handle…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 23.5 m³. General information on aluminum-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection of the...
Filter medium FIBALON rope 350 g
The innovative and patented FIBALON 3D polymer fiber filter consists of a combination of various polymer fibers with different surface structures and cross-sections, developed according to the latest scientific findings. The deliberately chosen spherical shape creates the largest possible filter surface area, and the optimized fiber combination guarantees a separation efficiency of 8 µm. The incorporation of silver ions effectively counteracts the formation of biofilm within the filter...
PS30 rectangular pool POOLSANA HQ 5.00 x 3.00 x 1.50 m foil…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 21 m³, number of insulating formwork blocks: 85 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the reinforcement may need to be adjusted.
Single steel-walled figure-eight pool POOLSANA HQ 4.70 x 3,…
Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 15.5 m³. General information on steel-walled figure-eight pools: All figure-eight pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. A base slab is required for all figure-eight pools, into which the included steel support structure, consisting of two side supports and one...
Steel wall round pool POOLSANA HQ 3.50 x 1.20 m PLUS set…
Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 10.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...
Steel wall round pool POOLSANA HQ 5.00 x 1.35 m PLUS set…
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 24.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...
Swimming pool built-in skimmer 17.5 245 mm
The pool surface skimmer, also called a skimmer, is the link between the sand filter system or pool pump and the pool. The pool skimmer draws water from the surface. This high-quality 17.5 x 245 mm built-in skimmer is made of impact- and pressure-resistant ABS plastic and is primarily suitable for solid pools such as insulated pools, polystyrene pools, and concrete pools. It features 1" and 12" internal connections, a 245 mm projection, and a height-adjustable lid. The skimmer basket is included for collecting coarse debris...