Round pool Alu PS SQ 5.00 x 1.50 m Alu handrail 0.9 mm …
4,84 €
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 27.5 m³. General information on aluminum-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, a concrete base slab is required – regardless of the pool size…
Description
Round pool POOL SANA SQ – Made in Germany – consisting of a 1 mm thick aluminum wall in silver-gray/white aluminum + a precisely fitting, 0.9 mm thick embossed 4D PVC pool liner in blue with a hanging bead + a combination special handrail made of high-quality and stable aluminum, as well as plastic base rails. As a PROFI set, it includes a POOL SANA UV-C disinfection unit (75 W) which significantly reduces water maintenance requirements, a 500 g/m² underlay fleece, a built-in skimmer and inlet nozzle, and a POOL SANA PRO PRIME 50 sand filter system…
Additional information
| Weight | 324,5 kg |
|---|
Related products
50 mm piping set for floor drain
Complete 50 mm piping kit for connecting the floor drain to the suction line. Consisting of: 1 x roll of SpaFlex hose 50 mm (12 m), 1 x 1.5 m PVC pipe 50 mm, 1 x 2-way ball valve 50 mm, 2 x 90° elbows 50 mm, 1 x T-piece 50 mm, 1 x adapter 2" male thread x 50 mm, 2 x pipe clips, 1 x PVC cleaner, 1 x PVC adhesive, 1 x roll of Teflon tape
PS3080 rectangular pool 8.00 x 4.00 x 1.50 m PROFI set Sanitary ware…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 45 m³, number of insulating blocks: 125 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the reinforcement may need to be adjusted.
PURE stainless steel pool ladder, narrow/wide 3-step
narrow-profile swimming pool ladder made of V2A stainless steel with a 43 mm diameter stiles, offering excellent value for money. On the inside of the pool, the stiles are fitted with plastic buffers that support the ladder against the pool wall without chafing the liner. On the outside of the pool, the ladder is secured using plastic mounting sleeves that are cemented flush with the ground and serve as anchor points for the ladder stiles. Alternative...
Round pool PS HQ 4.00 x 1.35m, aluminum handrail, 0.8mm liner…
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 15.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...
Single oval pool PS SQ 8.00 x 4.00 x 1.50 m aluminum…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 40 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing steel, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection of the...
Single round pool PS HQ 5.00 x 1.25 m with aluminum wall…
Pool depth 125 cm, water depth approx. 110-115 cm, capacity approx. 22.5 m³. General information on aluminum-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, a concrete base slab is required – regardless of the pool size…
Single steel-walled figure-eight pool PS HQ 5.25 x 3.20 x 1…
Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 17.5 m³. General information on steel-walled figure-eight pools: All figure-eight pools (1.20 m and 1.35 m) can be installed either freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. A base slab is required for all figure-eight pools, into which the included steel support structure, consisting of two side supports and one...
Steel-walled figure-eight pool PS HQ 4.70 x 3.00 x 1.35 m liner…
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 17.5 m³. General information on steel-walled figure-eight pools: All figure-eight pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. A base slab is required for all figure-eight pools, into which the included steel support structure, consisting of two side supports and one...