Large dosing float
2,42 €
Practical dispenser for large and small tablets, such as chlorine multi-tabs. The desired dosage can be individually adjusted using the adjustment ring at the bottom. Dimensions: Height approx. 19 cm, Diameter approx. 17 cm
SKU:
251077
Category: New products
Description
Dispenser for large and mini long-acting tablets.
Additional information
| Weight | 0,19 kg |
|---|
Related products
Foil repair kit with grey foil
14,52 €
Technicoll 8002 is specially formulated for bonding soft PVC films, vinyl, and rigid PVC to each other and to textiles, wood, paper, and cardboard. Repairs to PVC swimming pool and pond liners can even be carried out underwater. The adhesive has good vinyl and PVC dissolving properties and contains solvents. Instructions for use: The surfaces to be bonded must be clean and free of grease. Cut a piece of the enclosed film to fit the repair area. [The last sentence appears to be incomplete and requires context to be translated accurately.]
Pool cover MTH Air Protect UNI anthracite oval eight…
617,10 €
For optimal pool protection in winter, choose the AIR PROTECT inflatable cover from MTH, designed for oval and figure-eight pools. Both the top and bottom surfaces are made of woven-reinforced PVC, each weighing 580 g/m². When inflated, this double-layered cover forms a uniform dome over the pool, providing optimal protection. Rainwater, dirt, and even snow are prevented from entering your pool. A valve inlet adapter is included...
PREMIUM 400 my GeoBubble solar cover for round pools
118,58 €
Pool Solar Cover Made in Germany. This pool solar cover is manufactured in Germany in accordance with the highest quality standards. The welding of the film panels and the cutting to the pool shape are done by hand with dedication and attention to detail. When you purchase this pool solar cover, you receive genuine handcrafted quality. The work is carried out by skilled professionals, some of whom have decades of experience. The renowned...
PS30 rectangular pool POOLSANA 7.00 x 3.50 x 1.50 m 4D foil…
7,26 €
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 34.5 m³, number of insulating blocks: 110 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the type of reinforcement may need to be adjusted...
Round pool PS SQ 4.00 x 1.50 m, aluminum handrail, 4D liner 0,…
2,42 €
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 17.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...
Single oval pool PS SQ 8.00 x 4.00 x 1.50 m aluminum…
2,42 €
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 40 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing steel, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection of the...
Steel wall oval pool PS SQ 5.25 x 3.20 x 1.50 m with aluminum…
2,42 €
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 20.5 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After assembly, the ends of the oval pool are backfilled with lean concrete. For disinfection...
Steel-walled round pool with iron mica coating, aluminum handrail, and foil…
1 827,10 €
Pool depth 125 cm, water depth approx. 110-115 cm, capacity approx. 14.5 m³. General information on steel-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required, regardless of the pool size...
