Steel wall oval pool PS SQ 5.25 x 3.20 x 1.50 m with aluminum…
2,42 €
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 20.5 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After assembly, the ends of the oval pool are backfilled with lean concrete. For disinfection…
Description
Steel-walled oval pool POOL SANA SQ – Made in Germany – consisting of an approx. 0.8 mm thick, hot-dip galvanized steel wall + a precisely fitting, blue 1.0 mm PVC pool liner with a hanging bead + a combination special handrail made of high-quality and stable aluminum, as well as plastic base rails. As a PROFI set, it includes a POOL SANA UV-C disinfection unit (75 W) which significantly reduces water maintenance requirements, a 500 g/m² underlay fleece, a built-in skimmer and two inlet nozzles, and a POOL SANA PRO PRIME 400 SPECK PP 7 sand filter system…
Additional information
| Weight | 291,5 kg |
|---|
Related products
Aluminum wall round pool PS HQ with aluminum handrail 4.00 x 1.25 m PLU…
Pool depth 125 cm, water depth approx. 110-115 cm, capacity approx. 14.5 m³. General information on aluminum-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, a concrete base slab is required – regardless of the pool size…
Rectangular pool 8.00 x 4.00 x 1.50 m PROFI set high level …
Pool depth 150 cm, water depth approx. 142-144 cm, capacity approx. 45 m³, number of insulating blocks: 125 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the reinforcement may need to be adjusted.
Sand filter system POOLSANA Plus 400Pump 100
Heavy-duty and pressure-resistant filter tank Made in Germany. The sand filter tank with a diameter of 400 mm is made of polypropylene and is particularly impressive due to its high-quality workmanship and high pressure resistance of up to 1.5 bar. In combination with the self-priming, plug-and-play pool pump, which has a circulation capacity of approximately 8 m³/h at 6 mWs, 550 watts, 230 V, the system is very well suited for swimming pools up to approximately 40 m³. Filling capacity...
Set of 1 x COMPACT LED pool spotlight, white, 40 W, including safety device…
Create stunning accents and make your pool a real eye-catcher, even in the evening, with beautiful underwater lighting. Our flat LED pool lights bathe the water's surface in a pleasant light, creating a relaxing atmosphere by the pool. Equipped with a small recessed niche, this light is particularly well-suited for installation in curved steel walls, so you don't have to forgo beautiful lighting even with a round pool. Another...
Steel wall round pool POOLSANA HQ 3.00 x 1.20 m PLUS set…
Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 7.5 m³. General information on steel-walled round pools: All round pools 1.20 m and 1.35 m can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the swimming pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or other factors.
Steel wall round pool POOLSANA HQ with aluminum handrail 4.00 x 1,…
Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 14 m³. General information on steel-walled round pools: All round pools 1.20 m and 1.35 m can be installed either freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the swimming pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or...
Steel wall round pool POOLSANA HQ with aluminum handrail 4.00 x 1,…
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 15.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...
Steel-walled figure-eight pool PS HQ 5.25 x 3.20 x 1.50 m with aluminum…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 22.5 m³. General information on steel-walled figure-eight pools: All figure-eight pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. A base slab is required for all figure-eight pools, into which the included steel support structure, consisting of two side supports and one...