Pool skimmer with leaves, reinforced plastic, professional, blue
4,84 €
This plastic pool leaf skimmer easily removes debris from the pool surface. The skimmer features a flat mesh with dirt-collecting lips and a telescopic pole adapter for mounting on a telescopic pole. A telescopic pole is required for operation and can be ordered separately under “Matching Accessories.”
Related products
Inlet nozzle for hose connection
The pool nozzle is a built-in swimming pool component that returns water from the sand filter system, via the pool piping, back into the pool. This inlet nozzle is ideally suited for above-ground steel-walled pools, including round and figure-eight pools, where the pool piping remains easily accessible. The nozzle eye is individually adjustable. The nozzle is easy to install and suitable for 3238 mm hose piping. The recommended hole size for the steel wall is 60 mm. Seals are, of course, included.
PREMIUM underlay fleece, pack IV 36 m², quality 500 g/m²
Very strong, thermally and mechanically bonded, rot-proof underlay fleece for protecting the pool liner from PVC-incompatible materials, min. 500 g/m². Recommended for the following swimming pools from our range: Round pool 6.00 m, Oval pool 7.50 x 3.50 m, Oval pool 8.00 x 4.00 m, Figure-eight pool 7.25 x 4.60 m. The fleece is supplied in rolls 2 m wide and 18 m long. Due to manufacturing and packaging reasons, the fleece cannot always be delivered in one piece.
PS30 rectangular pool POOLSANA 8.00 x 4.00 x 1.50 m 4D foil…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 45 m³, number of insulating blocks: 125 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the reinforcement may need to be adjusted.
Round aluminum pool PS SQ 3.50 x 1.25 m, aluminum handrail 1.0 mm …
Pool depth 125 cm, water depth approx. 110-115 cm, capacity approx. 11 m³. General information on aluminum-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required regardless of the pool size...
Round pool Alu PS SQ 4.00 x 1.25 m Alu handrail 0.9 mm …
Pool depth 125 cm, water depth approx. 110-115 cm, capacity approx. 14.5 m³. General information on aluminum-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, a concrete base slab is required – regardless of the pool size…
Single pool, steel wall round pool POOLSANA HQ 5.00 x 1.50 m…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 27.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...
Single pool, steel wall round pool PS SQ 6.00 x 1.50 m with A…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 39.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...
Single round pool PS HQ 4.00 x 1.50 m with aluminum wall…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 17.5 m³. General information on aluminum-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, a concrete base slab is required – regardless of the pool size…