Pool floor cleaner Alu Professional
26,62 €
45 cm wide pool cleaner made of high-quality aluminum for skimmer connection. At 2.6 kg, the cleaner is relatively heavy, making it particularly easy to hold underwater. The bristles on the underside of the pool cleaner are mounted on a rail that yields under pressure, thus protecting the pool liner. Two additional rubber lips along the suction area ensure optimal cleaning results. The swivel hose connector is compatible with suction hoses with…
Related products
Aluminum mounting profiles for solid pools
The aluminum mounting profiles are attached to the pool edge and serve as liner holders. Profile width approx. 11 cm. Scope of delivery: Rectangular pool 5.00 x 3.00 m: 8 profiles at 2 m each (16 linear meters); Rectangular pool 6.00 x 3.00 m: 9 profiles at 2 m each (18 linear meters); Rectangular pool 7.00 x 3.50 m: 11 profiles at 2 m each (22 linear meters); Rectangular pool 8.00 x 4.00 m: 12 profiles at 2 m each (24 linear meters)
PS3080 rectangular pool 7.00 x 3.50 x 1.50 m PROFI set Sanitary ware…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 34.5 m³, number of insulating blocks: 110 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the type of reinforcement may need to be adjusted...
PS3080 rectangular pool 7.00×3.50×1.50m PROFI set high level…
Pool depth 150 cm, water depth approx. 142-144 cm, capacity approx. 35 m³, number of insulating blocks: 110 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the reinforcement may need to be adjusted.
Single pool steel wall round pool POOLSANA PQ 3.50 x 1.35 m
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 12 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or...
Single round pool PS HQ 4.50 x 1.25 m with aluminum wall…
Pool depth 125 cm, water depth approx. 110-115 cm, capacity approx. 18 m³. General information on aluminum-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required regardless of the pool size...
Steel-walled figure-eight pool PS HQ 5.25 x 3.20 x 1.50 m liner…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 22.5 m³. General information on steel-walled figure-eight pools: All figure-eight pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. A base slab is required for all figure-eight pools, into which the included steel support structure, consisting of two side supports and one...
Steel-walled figure-eight pool PS HQ 6.25 x 3.60 x 1.50 m with aluminum…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 28.5 m³. General information on steel-walled figure-eight pools: All figure-eight pools (1.20 m and 1.35 m) can be installed either freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. A base slab is required for all figure-eight pools, into which the included steel support structure, consisting of two side supports and one...
