Swimming pool round thermometer
16,94 €
Large round swimming pool thermometer with extra-long stainless steel probe, easy-to-read digits, and a tether. Technical specifications: Measuring range 0°C to +40°C, diameter 19 cm, probe length approx. 27 cm
SKU:
251006
Category: New products
Description
The classic pool thermometer, Ø 19 cm, easy to read in the water, stainless steel sensor and fastening cord.
Additional information
| Weight | 0,22 kg |
|---|
Related products
4D pool liner for oval pools, 0.9 mm, green
1 379,40 €
Pool Liner Made in Germany: This pool liner is manufactured in Germany in compliance with the highest quality standards. The work is carried out by skilled professionals, some of whom have decades of experience. The innovative and completely new 4D pool liner gives your pool an unparalleled interior lining. 4D expands the surface properties of a conventional pool liner by adding two more dimensions at once...
Oval pool POOLSANA HQ 8.00 x 4.00 x 1.50 m with aluminum handrail…
4,84 €
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 40 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing steel, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection of the...
PoolSANA PROFI pool spotlight with RGB LED bulb 30 W…
321,86 €
PAR56 Recessed Underwater Spotlight with RGB 30W LED Bulb. High-quality underwater spotlight made of impact- and pressure-resistant ABS for installation in straight pool walls, rectangular pools, and the straight sides of oval pools. The spotlight is equipped with a modern, energy-efficient RGB multicolor LED bulb with a 316LV4A stainless steel backplate, which produces a very bright light of up to 1,050 lm in mixed white with a maximum power consumption of 30 W. For oval pools or...
PS3080 rectangular pool POOLSANA HQ 6.00 x 3.00 x 1.50 m…
4,84 €
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 25 m³, number of insulating formwork blocks: 95 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the reinforcement may need to be adjusted.
Round pool Alu PS SQ 4.00 x 1.25 m Alu handrail 0.9 mm …
2,42 €
Pool depth 125 cm, water depth approx. 110-115 cm, capacity approx. 14.5 m³. General information on aluminum-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, a concrete base slab is required – regardless of the pool size…
Single oval pool PS SQ 5.25 x 3.20 x 1.50 m aluminum…
2,42 €
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 20.5 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After assembly, the ends of the oval pool are backfilled with lean concrete. For disinfection...
Single pool aluminum wall oval pool POOLSANA SQ 7.00 x 3.50 x 1…
4,84 €
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 30.5 m³. General information on aluminum-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing steel, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection of the...
Single steel-walled round pool PS SQ 3.50 x 1.35 m with A…
2 052,16 €
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 12 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or...
