Single steel-walled round pool PS SQ 3.50 x 1.35 m with A…
2 052,16 €
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 12 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or…
Description
Steel wall round pool POOL SANA SQ – Made in Germany – consisting of 0.8 mm thick, hot-dip galvanized steel wall + very precisely fitting, 0.9 mm thick embossed 4D PVC pool liner in green with hanging bead + combination special handrail made of high-quality and stable aluminum and bottom rails made of plastic.
Related products
POOLSANA LED Magnetic Pool Light RGB 10 W with App Control…
Easy Installation: Illuminating your swimming pool couldn't be simpler. Just attach the spotlight to the desired spot on your steel-walled pool, run the power cable over the edge, plug it into an external socket, and you can enjoy your pool to the fullest, even in the evenings. The magnets that ensure the necessary hold on the pool wall are permanently integrated into the spotlight housing. This protects them from water and therefore corrosion. For frame pools...
PS30 rectangular pool POOLSANA HQ 8.00 x 4.00 x 1.50 m foil…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 45 m³, number of insulating blocks: 125 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the reinforcement may need to be adjusted.
Rectangular pool 8.00 x 4.00 x 1.50 m PROFI set high level …
Pool depth 150 cm, water depth approx. 142-144 cm, capacity approx. 45 m³, number of insulating blocks: 125 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the reinforcement may need to be adjusted.
Single pool steel wall oval pool POOLSANA PQ 7.00 x 3.50 x…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 30.5 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection...
Single steel-walled round pool PS SQ 3.50 x 1.35 m with A…
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 12 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or...
Steel wall oval pool PS HQ 8.00 x 4.00 x 1.50 m foil 0.8…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 40 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing steel, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection of the...
Steel-walled figure-eight pool PS HQ 5.25 x 3.20 x 1.35 m liner…
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 20 m³. General information on steel-walled figure-eight pools: All figure-eight pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. A base slab is required for all figure-eight pools, into which the included steel support structure, consisting of two side supports and one base plate, is installed.
Steel-walled round pool PS HQ 3.00 x 1.20 m, liner 0.8 mm sand …
Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 7.5 m³. General information on steel-walled round pools: All round pools 1.20 m and 1.35 m can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the swimming pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or other factors.