Pool heat pump connection set Ø 50 mm
169,40 €
Connection kit for integrating the heat pump into the existing filter circuit via a bypass line with a pipe cross-section of 50 mm. Thanks to the ball valves included in the kit, the water pressure can be adjusted at any time to the changing outside temperature. The adhesive and cleaner are formulated to be suitable and sufficient for the bonding areas. Consisting of: 1 x roll of SpaFlex hose (12 m), 3 x 2-way ball valves (50 mm), 2 x T-pieces (50 mm), 2 x elbows (50 mm, 90°), 1 x PVC re-cable…
Related products
Aluminum wall oval pool PS SQ 5.25 x 3.20 x 1.50 m aluminum hand…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 20.5 m³. General information on aluminum-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection of the...
PoolSANA InverPEARL 8 Full Inverter Heat Pump
1. Innovative Technology and Outstanding Design The standout feature of InverPEARL heat pumps is the integrated LED lighting, which adorns the lower part of the front panel, extending almost across the entire width of the unit. The light is not only visually appealing but also indicates the current operating status of the heat pump, depending on its color: Blue light: The heat pump is operating and functioning without problems. Green light: The heat pump is...
Round pool PS SQ 4.00 x 1.50 m, aluminum handrail, 4D liner 0,…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 17.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...
Round pool PS SQ 4.00 x 1.50 m, aluminum handrail, 4D liner 0,…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 17.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...
Single pool aluminum wall oval pool POOLSANA SQ 5.25 x 3.20 x 1…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 20.5 m³. General information on aluminum-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection of the...
Single pool, aluminum wall oval pool PS HQ 7.00 x 3.50 x 1.50 m …
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 30.5 m³. General information on aluminum-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing steel, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection of the...
Steel wall round pool POOLSANA HQ with aluminum handrail 3.00 x 1,…
Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 7.5 m³. General information on steel-walled round pools: All round pools 1.20 m and 1.35 m can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the swimming pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or other factors.
Transport and storage caddy for pool robots POOLSA…
Loose items lying around, which not only look messy but also pose a tripping hazard, are a thing of the past. With our high-quality caddy, your entire setup is always perfectly organized and within easy reach. The caddy has two wheels at the back, allowing you to effortlessly transport it to and from the pool.