Transport and storage caddy for pool robots POOLSA…
169,40 €
Loose items lying around, which not only look messy but also pose a tripping hazard, are a thing of the past. With our high-quality caddy, your entire setup is always perfectly organized and within easy reach. The caddy has two wheels at the back, allowing you to effortlessly transport it to and from the pool.
Related products
Pool liner 1.0 mm for figure-eight pools, blue
Pool Liner Made in Germany: This pool liner is manufactured in Germany in compliance with the highest quality standards. From the production of the raw material into liner sheets to the finishing and welding together to create a complete pool lining, this pool liner guarantees you exclusively quality Made in Germany. The work is carried out by skilled professionals, some of whom have decades of experience. As a testament to our own conviction...
Pool roll-up device PROFI aluminum stainless steel mobile deluxe …
The aluminum winding shaft consists of two main shafts and three secondary shafts. The secondary shafts are slightly smaller in diameter than the main shaft and are inserted laterally into it and fixed in the desired position. This makes the winding device ideal for all rectangular pools up to a maximum width of 5.20 m. Features include wheels on one side, polished stainless steel feet, an aluminum winding shaft, a plastic handwheel, and eight mounting straps.
Pool roller system PROFI AluEdelstahl Deluxe for Au…
The perfect solution for above-ground pools: Thanks to extendable side supports, the winding shaft can be adjusted to any height, allowing the winding mechanism to be used with partially in-ground or freestanding pools. The aluminum winding shaft consists of two main shafts and three secondary shafts. The secondary shafts are slightly smaller in diameter than the main shaft and are inserted laterally into it and locked in the desired position. This makes the winding mechanism suitable for...
Rectangular pool 8.00 x 4.00 x 1.50 m PROFI set Grey Bottom…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 45 m³, number of insulating blocks: 125 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the reinforcement may need to be adjusted.
Round pool PS HQ 4.50 x 1.35m, aluminum handrail, 0.8mm liner…
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 20 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or...
Round pool PS SQ 4.00 x 1.35 m aluminum HL 4D foil 0.9 mm…
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 15.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...
Single pool, steel wall round pool PS HQ 3.50 x 1.20 m Fol…
Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 10.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...
Steel-walled figure-eight pool PS HQ 4.70 x 3.00 x 1.20 m liner…
Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 15.5 m³. General information on steel-walled figure-eight pools: All figure-eight pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. A base slab is required for all figure-eight pools, into which the included steel support structure, consisting of two side supports and one...