Pool roll-up device PROFI aluminum stainless steel mobile deluxe …
234,74 €
The aluminum winding shaft consists of two main shafts and three secondary shafts. The secondary shafts are slightly smaller in diameter than the main shaft and are inserted laterally into it and fixed in the desired position. This makes the winding device ideal for all rectangular pools up to a maximum width of 5.20 m. Features include wheels on one side, polished stainless steel feet, an aluminum winding shaft, a plastic handwheel, and eight mounting straps.
Related products
PoolSANA InverPOWER ULTRA 18 Full Inverter Heat Pump
1. Ultra-high energy efficiency. The name says it all. Thanks to full inverter technology combined with sophisticated design and control, our InverPOWER ULTRA heat pumps have a particularly high COP (coefficient of performance) of over 18, setting completely new standards in efficiency, as their heating output is many times higher than the power they draw from the grid. But the exterior is also impressive. The casing of the InverP...
PoolSANA PROFI pool spotlight with RGB LED bulb 30 W…
PAR56 Recessed Underwater Spotlight with RGB 30W LED Bulb. High-quality underwater spotlight made of impact- and pressure-resistant ABS for installation in straight pool walls, rectangular pools, and the straight sides of oval pools. The spotlight is equipped with a modern, energy-efficient RGB multicolor LED bulb with a 316LV4A stainless steel backplate, which produces a very bright light of up to 1,050 lm in mixed white with a maximum power consumption of 30 W. For oval pools or...
PS30 rectangular pool POOLSANA SQ 6.00 x 3.00 x 1.50 m foil…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 25 m³, number of insulating formwork blocks: 95 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the reinforcement may need to be adjusted.
Single round pool PS HQ 5.00 x 1.25 m with aluminum wall…
Pool depth 125 cm, water depth approx. 110-115 cm, capacity approx. 22.5 m³. General information on aluminum-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, a concrete base slab is required – regardless of the pool size…
Single round pool PS SQ 4.50 x 1.50 m with aluminum wall…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 22 m³. General information on aluminum-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required regardless of the pool size...
Single steel-walled round pool PS HQ 3.00 x 1.20 m with A…
Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 7.5 m³. General information on steel-walled round pools: All round pools 1.20 m and 1.35 m can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the swimming pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or other factors.
Single steel-walled round pool PS HQ 3.50 x 1.20 m with A…
Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 10.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...
SPECK Pool Pump SuperPro 14
High-quality premium pool pump SPECK pumps. For over 100 years, the name SPECK has stood like no other for quality filter pumps made in Germany. The SPECK BADU SuperPro is a monobloc pump with an integrated strainer. A bellows mechanical seal is mounted on the plastic impeller hub. The motor/pump shaft does not come into contact with the circulating water, thus ensuring separation of live and water-carrying parts. The SuperPro series...