Pool liner 0.8 mm for figure-eight pools, blue
641,30 €
Pool Liner Made in Germany: This pool liner is manufactured in Germany in compliance with the highest quality standards. From the production of the raw material into liner sheets to the finishing and welding together to create a complete pool lining, this pool liner guarantees you exclusively quality Made in Germany. The work is carried out by skilled professionals, some of whom have decades of experience. As a testament to our own conviction…
Related products
COMPACT LED RGB 30W pool spotlight with mini recessed mounting…
Water and light always make a wonderful combination, and with beautiful underwater lighting for your pool, you can achieve impressive effects. Your swimming pool will become the centerpiece and true highlight of your garden. Modern LED pool lighting is characterized above all by its strong luminosity, exceptional durability, and energy efficiency. Another advantage is that the pool water is not heated additionally – even during extended use.
Flow switch for POOLSANA UV disinfection unit
Dry-run protection: Switches the connected device on or off depending on whether water is flowing or not. Specifically designed for UV disinfection units, but can also be used for other electrical products up to 10 A 2300 W. Electrical connection: The device comes pre-equipped with a power cord, Schuko plug, and a socket. Water connection: Special T-piece with a mounting opening for the paddle switch (see adjacent image)...
PREMIUM 500 µm GeoBubble SolGuard solar film for oval and…
Pool Solar Cover Made in Germany. This pool solar cover is manufactured in Germany in accordance with the highest quality standards. The welding of the film panels and the cutting to the pool shape are done by hand with dedication and attention to detail. When you purchase this pool solar cover, you receive genuine handcrafted quality. The work is carried out by skilled professionals, some of whom have decades of experience. The renowned...
PS30 rectangular pool PS 7.00 x 3.50 x 1.50 m 4D film 0.9 …
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 34.5 m³, number of insulating blocks: 110 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the type of reinforcement may need to be adjusted...
Single pool aluminum wall oval pool POOLSANA HQ 5.25 x 3.20 x 1…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 20.5 m³. General information on aluminum-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection of the...
Single pool steel wall oval pool PS HQ 7.00 x 3.50 x 1.50 …
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 30.5 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection...
Single pool steel wall round pool POOLSANA PQ 3.50 x 1.50 m
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 13.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...
Single pool, steel wall round pool POOLSANA HQ 4.00 x 1.35 m…
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 15.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...