Pool liner 0.8 mm for figure-eight pools, blue
641,30 €
Pool Liner Made in Germany: This pool liner is manufactured in Germany in compliance with the highest quality standards. From the production of the raw material into liner sheets to the finishing and welding together to create a complete pool lining, this pool liner guarantees you exclusively quality Made in Germany. The work is carried out by skilled professionals, some of whom have decades of experience. As a testament to our own conviction…
Related products
Aluminum wall oval pool PS HQ 8.00 x 4.00 x 1.50 m with aluminum handle…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 40 m³. General information on aluminum-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection of the pool...
Film repair set with 4D film sand
Technicoll 8002 is specially formulated for bonding soft PVC films, vinyl, and rigid PVC to each other and to textiles, wood, paper, and cardboard. Repairs to PVC swimming pool and pond liners can even be carried out underwater. The adhesive has good vinyl and PVC dissolving properties and contains solvents. Instructions for use: The surfaces to be bonded must be clean and free of grease. Cut a piece of the enclosed film to fit the repair area. [The last sentence appears to be incomplete and requires context to be translated accurately.]
PS30 rectangular pool POOLSANA 8.00 x 4.00 x 1.50 m 4D foil…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 45 m³, number of insulating blocks: 125 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the reinforcement may need to be adjusted.
PS30 rectangular pool POOLSANA SQ 8.00 x 4.00 x 1.50 m foil…
Pool depth 150 cm, water depth approx. 142-144 cm, capacity approx. 45.5 m³, number of insulating blocks: 125 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the type of reinforcement may need to be adjusted...
Round pool Alu PS SQ 3.00 x 1.25 m Alu handrail 1.0 mm …
Pool depth 125 cm, water depth approx. 110-115 cm, capacity approx. 8 m³. General information on aluminum-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size.
Steel wall oval pool POOLSANA HQ 7.00 x 3.50 x 1.50 m PROFI…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 30.5 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection...