Cable connection box, distribution box PROFI
24,20 €
The cable junction box is mounted above the waterline in fully in-ground swimming pools and is connected to the underwater spotlight installed in the pool via a cable protection conduit (not included in the scope of delivery). The cable from the spotlight can then be extended as needed within the junction box using terminal blocks to route it to the low-voltage safety transformer.
Related products
Aluminum wall oval pool PS HQ 7.00 x 3.50 x 1.50 m with aluminum handle…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 30.5 m³. General information on aluminum-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing steel, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection of the...
PS PREMIUM 500 sand filter system with Speck PS SuperP pump…
Maximum convenience thanks to the two-part tank design. The centrally divided design makes filling and changing the sand particularly easy, making the system ideal for installation in confined spaces such as basements or filter shafts. The two tank halves are connected by a stainless steel clamping ring, which is finished with a visually appealing black protective coating. The tank is made of GRP (glass-reinforced plastic)...
PS30 rectangular pool POOLSANA 6.00 x 3.00 x 1.50 m 4D foil…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 25 m³, number of insulating formwork blocks: 95 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the reinforcement may need to be adjusted.
Round pool PS HQ 4.00 x 1.35 m, aluminum handrail, 0.8mm liner…
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 15.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...
Round pool PS SQ 4.50 x 1.50 m, aluminum handrail, 4D liner 0,…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 22 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or...
Round pool PS SQ 6.00 x 1.50 m aluminum HL 4D foil 0.9 mm…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 39.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...
Single round pool PS SQ 4.50 x 1.50 m with aluminum wall …
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 22 m³. General information on aluminum-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required regardless of the pool size...
Steel-walled figure-eight pool PS HQ 4.70 x 3.00 x 1.20 m liner…
Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 15.5 m³. General information on steel-walled figure-eight pools: All figure-eight pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. A base slab is required for all figure-eight pools, into which the included steel support structure, consisting of two side supports and one...