Complete set of PS combination special handrails made of aluminum for round…
329,12 €
The POOL SANA aluminum combination handrail offers not only visual and tactile advantages over plastic handrails, but also exceptional stability and durability. Furthermore, it is extremely resistant to environmental influences such as UV radiation, does not fade, and retains its attractive appearance even after many years. The handrail also features an additional recess on the side for wedge-bead liners, which significantly simplifies future liner replacements.
Related products
Aluminum wall oval pool PS SQ 8.00 x 4.00 x 1.50 m with aluminum handrail…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 40 m³. General information on aluminum-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection of the pool...
PS3080 rectangular pool POOLSANA HQ 8.00 x 4.00 x 1.50 m…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 45 m³, number of insulating blocks: 125 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the reinforcement may need to be adjusted.
Round pool Alu PS SQ 4.00 x 1.25 m Alu handrail 0.9 mm …
Pool depth 125 cm, water depth approx. 110-115 cm, capacity approx. 14.5 m³. General information on aluminum-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, a concrete base slab is required – regardless of the pool size…
Round pool PS SQ 4.50 x 1.35 m, aluminum handrail, 4D liner 0,…
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 20 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or...
Single oval pool PS SQ 7.00 x 3.50 x 1.50 m aluminum…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 30.5 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection...
Single pool steel wall oval pool POOLSANA HQ 4.90 x 3.00 x…
Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 14 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing steel, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection of the...
Single steel-walled round pool PS SQ 4.50 x 1.50 m with A…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 22 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or...
Steel wall oval pool PS HQ 8.00 x 4.00 x 1.50 m foil 0.8…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 40 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing steel, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection of the...