Film repair set with 4D film blue
14,52 €
Technicoll 8002 is specially formulated for bonding soft PVC films, vinyl, and rigid PVC to each other and to textiles, wood, paper, and cardboard. Repairs to PVC swimming pool and pond liners can even be carried out underwater. The adhesive has good vinyl and PVC dissolving properties and contains solvents. Instructions for use: The surfaces to be bonded must be clean and free of grease. Cut a piece of the enclosed film to fit the repair area. [The last sentence appears to be incomplete and requires context to be translated accurately.]
Related products
4D pool liner for rectangular pools, 0.9 mm, green
Pool Liner Made in Germany: This pool liner is manufactured in Germany in compliance with the highest quality standards. The work is carried out by skilled professionals, some of whom have decades of experience. The innovative and completely new 4D pool liner gives your pool an unparalleled interior lining. 4D expands the surface properties of a conventional pool liner by adding two more dimensions at once...
Oval pool POOLSANA HQ 7.00 x 3.50 x 1.50 m with aluminum handrail…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 30.5 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection...
PROMO stainless steel 3-step hook-on ladder, narrow flare
narrow-profile swimming pool ladder made of V2A stainless steel with a 43 mm diameter stiles, offering excellent value for money. The stiles are fitted with plastic caps on the inside of the pool, providing support against the pool wall without chafing the liner. On the outside of the pool, the ladder is secured using plastic mounting sleeves that are cemented flush with the ground and serve as anchor points for the stiles. Alternatively...
PS30 rectangular pool PS 6.00 x 3.00 x 1.50 m 4D film 0.9 …
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 25 m³, number of insulating formwork blocks: 95 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the reinforcement may need to be adjusted.
Round pool PS SQ 3.50 x 1.35 m, aluminum handrail, 4D liner 0,…
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 12 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or...
Single pool, steel wall round pool PS HQ 4.50 x 1.20 m Fol…
Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 17.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...
Steel wall oval pool POOLSANA HQ 6.00 x 3.20 x 1.50 m with…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 23.5 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After assembly, the ends of the oval pool are backfilled with lean concrete. For disinfection...
Steel wall oval pool PS HQ 8.00 x 4.00 x 1.50 m foil 0.8…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 40 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing steel, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection of the...