Foil repair kit with blue foil
14,52 €
Technicoll 8002 is specially formulated for bonding soft PVC films, vinyl, and rigid PVC to each other and to textiles, wood, paper, and cardboard. Repairs to PVC swimming pool and pond liners can even be carried out underwater. The adhesive has good vinyl and PVC dissolving properties and contains solvents. Instructions for use: The surfaces to be bonded must be clean and free of grease. Cut a piece of the enclosed film to fit the repair area. [The last sentence appears to be incomplete and requires context to be translated accurately.]
Related products
Aluminum wall oval pool PS HQ 7.00 x 3.50 x 1.50 m aluminum hand…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 30.5 m³. General information on aluminum-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing steel, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection of the...
Aluminum wall round pool PS HQ with aluminum handrail 5.00 x 1.25 m PRO…
Pool depth 125 cm, water depth approx. 110-115 cm, capacity approx. 22.5 m³. General information on aluminum-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, a concrete base slab is required – regardless of the pool size…
MTH Air Protect UNI blue rectangular pool cover with rope
For optimal pool protection in winter, choose the inflatable AIR PROTECT cover from MTH, designed for rectangular pools. Both the top and bottom surfaces are made of woven-reinforced PVC, each weighing 580 g/m². When inflated, this double-layered cover forms a uniform dome over the pool, providing excellent protection. Rainwater, dirt, and even snow are prevented from entering your pool. A valve inlet adapter (diameter...) is included.
PS30 rectangular pool POOLSANA SQ 8.00 x 4.00 x 1.50 m foil…
Pool depth 150 cm, water depth approx. 142-144 cm, capacity approx. 45.5 m³, number of insulating blocks: 125 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the type of reinforcement may need to be adjusted...
Rectangular pool 6.00 x 3.00 x 1.50 m PLUS set sand under…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 25 m³, number of insulating formwork blocks: 95 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the reinforcement may need to be adjusted.
Set of 2 x COMPACT LED pool lights, white, 40 W, including safety device…
Beautiful underwater lighting brings atmospheric light to your pool, allowing you to extend your swimming fun well into the evening. Enjoy the cozy ambiance and treat yourself to some downtime. Modern LED pool lights not only create a stunning look but are also energy-efficient, long-lasting, low-maintenance, and yet powerful. Another advantage is that, despite their high performance, LED pool lights emit very little heat.
Single pool aluminum wall oval pool POOLSANA SQ 6.00 x 3.20 x 1…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 23.5 m³. General information on aluminum-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection of the...
Steel-walled figure-eight pool PS HQ 6.25 x 3.60 x 1.35 m liner…
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 25.5 m³. General information on steel-walled figure-eight pools: All figure-eight pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. A base slab is required for all figure-eight pools, into which the included steel support structure, consisting of two side supports and one...