Oval pool POOLSANA HQ 4.90 x 3.00 x 1.20 m with aluminum handrail... - Image 1
Click to enlarge
Home » Shop » Oval pool POOLSANA HQ 4.90 x 3.00 x 1.20 m with aluminum handrail…

Oval pool POOLSANA HQ 4.90 x 3.00 x 1.20 m with aluminum handrail…

2,42 €

Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 14 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing steel, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection of the…

SKU: 106421 Category:
Description

Steel-walled oval pool POOL SANA HQ – Made in Germany – consisting of a 0.6 mm thick, hot-dip galvanized steel wall + a precisely fitting, sand-colored 0.8 mm PVC pool liner with a hanging bead + a combination handrail made of high-quality and sturdy aluminum, as well as plastic base rails. The PLUS set includes a 300 g/m² underlay, built-in skimmer and inlet nozzle, POOL SANA Pro 300 AQUA Plus 4 sand filter system (Made in Germany) including filter sand, and a PROFI Ø 50 mm underground piping set. (Narrow projection…)

Additional information
Weight209 kg

Related products

Ladder tilt joint for ASTRALPOOL ladders

350,90 €
The ladder end pieces, made of V2A stainless steel, are attached directly to a solid surface and allow the pool ladder to be tilted upwards by 90 degrees, for example, to cover the swimming pool. The delivery includes two tilting joints with seals, dowels, screws, and cover rosettes. Dimensions in mm
Add to cart

Oval pool POOLSANA HQ 6.00 x 3.20 x 1.50 m with aluminum handrail…

2,42 €
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 23.5 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After assembly, the ends of the oval pool are backfilled with lean concrete. For disinfection...
Add to cart

Pool skimmer with reinforced plastic bottom, professional quality

7,26 €
Plastic floor skimmer net with a deep mesh and debris-collecting lips. A telescopic pole is required for operation. This can be ordered directly under "Matching Accessories".
Add to cart

Single steel-walled figure-eight pool POOLSANA HQ 6.25 x 3,…

2,42 €
Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 22.5 m³. General information on steel-walled figure-eight pools: All figure-eight pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. A base slab is required for all figure-eight pools, into which the included steel support structure, consisting of two side supports and one...
Add to cart

Steel wall oval pool PS HQ 7.00 x 3.50 x 1.50 m foil 0.8…

2,42 €
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 30.5 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection...
Add to cart

Steel-walled figure-eight pool PS HQ 4.70 x 3.00 x 1.35 m liner…

2,42 €
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 17.5 m³. General information on steel-walled figure-eight pools: All figure-eight pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. A base slab is required for all figure-eight pools, into which the included steel support structure, consisting of two side supports and one...
Add to cart

Steel-walled figure-eight pool PS HQ 5.25 x 3.20 x 1.20 m liner…

2,42 €
Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 17.5 m³. General information on steel-walled figure-eight pools: All figure-eight pools (1.20 m and 1.35 m) can be installed either freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. A base slab is required for all figure-eight pools, into which the included steel support structure, consisting of two side supports and one...
Add to cart

Steel-walled round pool with iron mica coating, aluminum handrail, and foil…

2 403,06 €
Pool depth 125 cm, water depth approx. 110-115 cm, capacity approx. 22.5 m³. General information on steel-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, a concrete base slab is required, regardless of the pool size...
Add to cart