Pool cleaning half-moon brush weighted down
9,68 €
Approximately 26 x 18 cm, crescent-shaped pool cleaner with a transparent housing and lower bristles for manually brushing and vacuuming the pool via the skimmer. The cleaner is weighted, making it very easy to keep submerged. Its shape makes it particularly well-suited for curved pools such as round, oval, and figure-eight pools. The swivel hose connector is compatible with suction hoses with diameters of 32 and 38 mm. Includes a spring-loaded telescopic pole adapter.
Related products
MTH Air Protect UNI grey round pool cover with rope
For optimal pool protection in winter, choose the inflatable AIR PROTECT PROFI cover for round pools. Both the top and bottom surfaces are made of reinforced PVC fabric, weighing 580 g/m² per side. When inflated, this double-layered cover forms a uniform dome over the pool. This provides optimal protection, preventing rainwater, dirt, and even snow from entering your pool. A valve inlet adapter with a 20 mm diameter connection is included...
Round pool Alu PS HQ 4.00 x 1.25 m Alu handrail 0.8 mm …
Pool depth 125 cm, water depth approx. 110-115 cm, capacity approx. 14.5 m³. General information on aluminum-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, a concrete base slab is required – regardless of the pool size…
Round pool PS SQ 5.00 x 1.35 m, aluminum handrail, 1.0 mm liner…
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 24.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...
Steel wall oval pool PS HQ 4.90 x 3.00 x 1.20 m with aluminum…
Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 14 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing steel, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection of the...
Steel wall round pool POOLSANA HQ 3.00 x 1.35 m PLUS set…
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 9 m³. General information on steel-walled round pools: All round pools 1.20 m and 1.35 m can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the swimming pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or...
Steel wall round pool POOLSANA PQ 4.00 x 1.20 m PURE set F…
Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 14 m³. General information on steel-walled round pools: All round pools 1.20 m and 1.35 m can be installed either freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the swimming pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or...
Steel-walled figure-eight pool PS HQ 5.25 x 3.20 x 1.50 m liner…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 22.5 m³. General information on steel-walled figure-eight pools: All figure-eight pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. A base slab is required for all figure-eight pools, into which the included steel support structure, consisting of two side supports and one...