Pool liner 0.8 mm for oval pools, grey
689,70 €
Pool Liner Made in Germany: This pool liner is manufactured in Germany in compliance with the highest quality standards. From the production of the raw material into liner sheets to the finishing and welding together to create a complete pool lining, this pool liner guarantees you exclusively quality Made in Germany. The work is carried out by skilled professionals, some of whom have decades of experience. As a testament to our own conviction…
Related products
Aluminum wall oval pool PS HQ 6.00 x 3.20 x 1.50 m with aluminum handle…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 23.5 m³. General information on aluminum-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection of the...
Pool heat pump POOLSANA InverPRESTIGE 15
1. High Energy Efficiency: Thanks to full inverter technology combined with sophisticated design and control, our InverPRESTIGE heat pumps have a particularly high coefficient of performance (COP). Specifically, this means that the heat pumps deliver many times the heating output they themselves draw from the grid. Our InverPRESTIGE series also scores highly in terms of appearance. The heat pump housing is made of metal with a black protective coating...
Pool pump POOLSANA Pump 75
Self-priming, reliable pool pump. The POOLSANA Pump 75 impresses above all with its compact design and very high reliability. This TÜV and GS-certified, self-priming pool pump features a pre-filter basket, a drain unit, and comes pre-equipped with a power cable and plug. The pump has a circulation capacity of 6 m³/h at 6 mWS and is ideally suited for swimming pools up to approximately 25 m³ water capacity or for filter tanks with a capacity of...
Round aluminum pool PS SQ 4.50 x 1.25 m, aluminum handrail 0.9 mm …
Pool depth 125 cm, water depth approx. 110-115 cm, capacity approx. 18 m³. General information on aluminum-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required regardless of the pool size...
Round pool Alu PS SQ 5.00 x 1.50 m Alu handrail 0.9 mm …
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 27.5 m³. General information on aluminum-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, a concrete base slab is required – regardless of the pool size…
Single pool, steel wall round pool PS HQ 3.50 x 1.20 m Fol…
Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 10.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...
Steel-walled figure-eight pool PS HQ 5.25 x 3.20 x 1.35 m liner…
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 20 m³. General information on steel-walled figure-eight pools: All figure-eight pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. A base slab is required for all figure-eight pools, into which the included steel support structure, consisting of two side supports and one base plate, is installed.