Pool solar cover PREMIUM 500 µ OXO Sapphire Blue for round pools
123,42 €
Pool Solar Cover Made in Germany. This pool solar cover is manufactured in Germany in accordance with the highest quality standards. The welding of the film panels and the cutting to the pool shape are done by hand with dedication and attention to detail. When you purchase this pool solar cover, you receive genuine handcrafted quality. The work is carried out by skilled professionals, some of whom have decades of experience. The renowned…
Related products
Rectangular pool 7.00 x 3.50 x 1.50 m PLUS set Blue Under…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 34.5 m³, number of insulating blocks: 110 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the type of reinforcement may need to be adjusted...
Round pool PS HQ 4.50 x 1.50 m, aluminum handrail, 0.8mm liner…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 22 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or...
Round pool PS SQ 4.00 x 1.35 m aluminum HL 4D foil 0.9 mm…
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 15.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...
Single oval pool POOLSANA HQ 5.25 x 3.20 x 1.50 m with aluminum …
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 20.5 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After assembly, the ends of the oval pool are backfilled with lean concrete. For disinfection...
Single pool steel wall round pool POOLSANA PQ 3.50 x 1.50 m
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 13.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...
Steel wall round pool POOLSANA HQ 3.00 x 1.35 m PLUS set…
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 9 m³. General information on steel-walled round pools: All round pools 1.20 m and 1.35 m can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the swimming pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or...
Steel wall round pool POOLSANA HQ with aluminum handrail 3.00 x 1,…
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 9 m³. General information on steel-walled round pools: All round pools 1.20 m and 1.35 m can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the swimming pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or...
Steel-walled figure-eight pool PS HQ 4.70 x 3.00 x 1.35 m liner…
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 17.5 m³. General information on steel-walled figure-eight pools: All figure-eight pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. A base slab is required for all figure-eight pools, into which the included steel support structure, consisting of two side supports and one...